Bedienungsanleitung Sencor SFR 6200 (Seite 9 von 10) (Englisch)

758990

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

- 9 - 03/2020

Removing unpleasant odours from the frying medium

■ Some foods, for example fish, may impart an unpleasant odour to the frying

medium. This odour can be neutralised using the following method:

– heat the frying medium to atemperature of 160 ˚C

– place afew shoots of parsley or two slices of bread into the frying medium,

– wait until "bubbles" stop forming, then using a suitable utensil, remove the

parsley or bread.

Overheating protection

■ The fryer is equipped with a safety fuse against overheating, which protects it

against damage. In the event of the fryer heating up excessively, e.g. due to long

use or accidentally starting it without the frying medium, the safety fuse against

overheating will be activated automatically. In such acase, the deep fryer will shut

off. Disconnect the deep fryer from the power socket and allow it to cool down.

Contact an authorised service centre to request areplacement of the safety fuse.

Under no circumstances should you replace the safety fuse yourself.

Attention:

Despite the fact that the deep fryer has overheating protection,

do not use it empty without the frying medium. The incorrect

use of the deep fryer may negatively affect its working order and

lifetime.

Handling the frying medium

■ When not using the deep fryer regularly, it is recommended to pour the cooled

down frying medium into enclosed bottles or other deep frying containers and to

store it in arefrigerator or another cool place. Pour the frying medium into bottles

through afine strainer to filter out food residues.

Warning:

Prior to transferring the frying medium, always allow it to cool

down sufficiently to prevent serious burns.

■ It is not necessary to replace the frying medium after every use. If you fry mainly

potatoes and filter the frying medium, it is possible is reuse it 8 to 10×. Do not use

the same frying medium for more than 6 months.

■ Always replace the frying medium when:

– it has abrown colour or from the very beginning stinks or smokes

– there is too much water in it. Ahigh water concentration in the oil or shortening/

fat is indicated by bubbles and water drops, water steam and a rapidly rising

oil or shortening/fat. If the water concentration in the deep fryer is too high, it

may happen that the oil or shortening fat may explode out, which can be very

dangerous to both the people using the deep fryer as well as those in its vicinity.

■ If you wish to replace the frying medium, proceed as follows:

– prepare acontainer with an appropriate volume

– disconnect the deep fryer from the power grid

– tilt open the lid, take out the frying basket, hold the deep fryer unit by its handles

and pour out the frying medium into the prepared container

Warning:

Replace the frying medium only after it has cooled down

completely. In the event that shortening fat was used, it must still

be partially liquid for it to be poured out.

■ Never pour used frying medium into standard household waste. Every municipality

has different regulations for the disposal of table oils and fats. Request information

about your disposal options at the municipal or town council office.

■ If you wish to only filter out the frying medium, proceed as follows:

– disconnect the deep fryer from the power grid

– pour the completely cooled down frying medium from the frying pot into

another container with asuitable volume capacity.

– wash the frying pot and dry it thoroughly

– pour the frying medium back through an appropriate filtration paper

CLEANING AND MAINTENANCE

Attention:

Prior to any cleaning or maintenance, always disconnect the deep

fryer from the power grid and allow it to cool down completely.

Attention:

The deep fryer unit and its power cord are not intended for

washing in adishwasher.

Do not spray these parts with water or any other liquid or

submerge them in water or any another liquid.

■ We recommend cleaning the deep fryer immediately after it cools down to prevent

food scraps from drying on. These are harder to remove later.

■ After every use, wipe the deep fryer unit using asoft damp cloth; wipe the power

cord using adry cloth.

■ Slide the handle out of the frying basket and wash both in hot water with detergent,

rinse and dry thoroughly with afine wiping cloth. These parts can also be washed

in adishwasher.

■ Wipe out the inside of the deep fryer unit using paper towels, tougher soils can be

cleaned using asoft sponge and then wipe it dry.

■ In the event that the filter D3 or the viewing window glass D2 are very dirty, screw

out the cover plate D1 from the underside of the lid, wash the filter and the glass

in hot water with detergent, rinse and dry thoroughly with afine cloth. Return both

parts to their place and screw the cover plate back on.

Attention:

To clean the deep fryer unit or the frying pot, never use chemicals,

dishwashing abrasive wool, steel wool or cleaning products with

abrasive component since these can damage them.

■ Every time the frying medium is poured out, remove any frying medium stains or

remains from previous frying that have stuck to the hotplate or the deep fryer unit.

STORAGE

■ Before storing it, the deep fryer must be completely cool and disconnected from the

power supply, clean and dry.

■ Place the frying basket into the frying pot and tilt down the lid.

■ Then store the deep fryer in a clean, dry and well-ventilated place out of

children'sreach.

Attention:

Keep the stored deep fryer away from extreme temperatures,

direct sunlight and excessive humidity and do not store it in an

overly dusty environment. Do not place any items on the stored

deep fryer.

TROUBLESHOOTING

■ If the appliance does not work as described in the user'smanual, check the list of

most frequent problems below in order to remedy the problem. In the event that

your problem is not listed or if the problem persists, turn off the appliance, pull the

power plug out of the power socket and contact an authorised service centre. Under

no circumstances should you attempt to repair the appliance yourself.

Problem Possible cause Solution

The fryer is not

working

The fryer is not connected

to apower socket.

Check that the power plug is connected

to apower socket.

You did not turn on the

fryer, you did not set the

temperature.

Use the control dial to turn on the

deep fryer and set it to one of the

temperatures.

The deep fryer overheated

and protection was

activated.

Wait several minutes for the deep fryer

to cool down and try turning it on again.

If necessary, contact an authorised

service centre.

Food is

insufficiently

cooked.

You set atemperature

that is too low.

Use the control dial to increase the

temperature.

Too much food in the

frying basket. Remove some of the food.

The food contains remains

of ice or too much

moisture.

Before frying, remove the ice remains

and thoroughly dry the food.

Fresh French

fries are not

crispy.

The crispiness of fresh

Fresh fries depends on the

amount of oil and water

content.

Thoroughly dry French fries before

frying them. Slice them up

into smaller pieces and add

more oil if necessary.

The frying

medium

foams

excessively

during the

deep frying

process.

The food contains remains

of ice or too much

moisture.

Before frying, remove the ice remains

and thoroughly dry the food.

The frying medium is not

suitable for frying.

Use oil or shortening fat suitable for

frying.

The frying medium has

been used for too

long.

Replace the frying medium.

The deep fryer

is emitting an

unpleasant

odour

The frying medium is no

longer fresh. Replace the frying medium.

The frying medium is not

suitable for frying.

Use oil or shortening fat recommended

for frying. Do not combine various types

of oil and shortening fat.

TECHNICAL SPECIFICATIONS

Rated voltage range ...............................................................................................................230 VAC

Rated frequency........................................................................................................................50/60 Hz

Rated power input ........................................................................................................................ 900 W

Frying pot capacity .......................................................................1.5 litres / 600 g of French fries

Dimensions (height × width × depth) .................................... 210 mm × 270 mm × 220 mm

Weight ................................................................................................................................................1.9 kg

Changes to text and technical parameters are reserved.

Sencor SFR 6200 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info