Bedienungsanleitung Sencor SFR 8200 (Seite 10 von 10) (Englisch)

758992

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

- 10 - 03/2020

■ Never pour used frying medium into standard household waste. Every municipality

has different regulations for the disposal of table oils and fats. Request information

about your disposal options at the municipal or town council office.

■ If you wish to only filter out the frying medium, proceed as follows:

– disconnect the deep fryer from the power grid

– pour the completely cooled down frying medium from the frying pot into

another container with a suitable volume capacity.

– wash the frying pot and dry it thoroughly

– pour the frying medium back through an appropriate filtration paper

CLEANING AND MAINTENANCE

Attention:

Prior to any cleaning or maintenance, always disconnect the deep

fryer from the power grid and allow it to cool down completely.

Attention:

The deep fryer unit, power cord and the heating element are not

intended for washing in a dishwasher.

Do not spray these parts with water or any other liquid or

submerge them in water or any another liquid.

■ We recommend cleaning the deep fryer immediately after it cools down to prevent

food scraps from drying on. These are harder to remove later.

■ After every use, wipe the deep fryer unit and the heating module with heating

element using a soft damp cloth; wipe the power cord using a dry cloth.

■ Wash the lid, frying basket including the handle, the frying pot in hot water with

detergent, rinse and dry thoroughly with a fine wiping cloth. The frying pot can also

be washed in a dishwasher.

■ Wipe out the inside of the deep fryer unit using paper towels, tougher soils can be

cleaned using a soft sponge and then wipe it dry.

■ In the event that the filter D2 or the viewing window glass D3 are very dirty, screw

out the cover plate D1 from the underside of the lid, wash the filter and the glass

in hot water with detergent, rinse and dry thoroughly with a fine cloth. Return both

parts to their place and screw the cover plate back on.

Attention:

To clean the deep fryer unit or the frying pot, never use chemicals,

dishwashing abrasive wool, steel wool or cleaning products with

abrasive component since these can damage them.

■ After pouring out the frying medium, always remove any dripped frying medium

and remains from prior deep frying.

STORAGE

■ Before storing it, the deep fryer must be completely cool and disconnected from the

power supply, clean and dry.

■ Assemble the deep fryer in the same way as for frying and put on the lid.

■ Then store the deep fryer in a clean, dry and well-ventilated place out of children's

reach.

Attention:

Keep the stored deep fryer away from extreme temperatures,

direct sunlight and excessive humidity and do not store it in an

overly dusty environment. Do not place any items on the stored

deep fryer.

TROUBLESHOOTING

■ If the appliance does not work as described in the user's manual, check the list of

most frequent problems below in order to remedy the problem. In the event that

your problem is not listed or if the problem persists, turn off the appliance, pull the

power plug out of the power socket and contact an authorised service centre. Under

no circumstances should you attempt to repair the appliance yourself.

Problem Possible cause Solution

The fryer is not

working

The fryer is not connected to

a power socket.

Check that the power plug is

connected to a power socket.

You did not turn on the

fryer, you did not set the

temperature.

Turn on the deep fryer and set

it to one of the temperatures.

The deep fryer overheated

and protection was activated.

Wait several minutes for the

deep fryer to cool down

and try turning it on again.

If necessary, contact an

authorised service centre.

Food is insufficiently

cooked.

You set a temperature that

is too low. Increase the temperature

Too much food in the frying

basket. Remove some of the food.

The food contains remains of

ice or too much moisture.

Before frying, remove the ice

remains and thoroughly dry

the food.

Fresh French fries

are not crispy.

The crispiness of fresh Fresh

fries depends on the amount

of oil and water content.

Thoroughly dry French fries

before frying them. Slice

them up

into smaller pieces and add

more oil if necessary.

The frying medium

foams excessively

during the deep

frying process.

The food contains remains of

ice or too much moisture.

Before frying, remove the ice

remains and thoroughly dry

the food.

The frying medium is not

suitable for frying.

Use oil or shortening fat

suitable for frying.

The frying medium has been

used for too

long.

Replace the frying medium.

The deep fryer

is emitting an

unpleasant odour.

The frying medium is no

longer fresh. Replace the frying medium.

The frying medium is not

suitable for frying.

Use oil or shortening fat

recommended for frying. Do

not combine various types of

oil and shortening fat.

The text EEE is

shown on the

display.

Faulty temperature sensor.

Immediately stop using the

deep fryer and contact an

authorised service centre.

TECHNICAL SPECIFICATIONS

Rated voltage range ...............................................................................................................230 V AC

Rated frequency........................................................................................................................50/60 Hz

Rated power input .....................................................................................................................2,400 W

Frying pot capacity ......................................................................3.2 litres / 1.4 kg of French fries

Dimensions (height × width × depth) .................................... 195 mm × 215 mm × 364 mm

Weight ...................................................................................................................................................3 kg

Changes to text and technical parameters are reserved.

INSTRUCTIONS AND INFORMATION REGARDING THE

DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at a site designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC

EQUIPMENT

This symbol on products or original documents means that used

electric or electronic products must not be added to ordinary

municipal waste. For proper disposal, renewal and recycling, hand

these products over to determined collection points. Alternatively, in

some European Union states or other European countries you may

return your appliances to the local retailer when buying an equivalent

new appliance.

Correct disposal of this product helps save valuable natural resources

and prevents potential negative effects on the environment and human health, which

could result from improper waste disposal. Ask your local authorities or collection

facility for more details.

In accordance with national regulations penalties may be imposed for the incorrect

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic devices, ask your retailer or supplier for

the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product,

request the necessary information about the correct disposal method from the local

council or from your retailer.

This product meets all the basic requirements of EU directives related to

it.

Sencor SFR 8200 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info