Bedienungsanleitung Sencor SFR 9300 (Seite 13 von 16) (Englisch)

758993

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Multi-cooker and fryer

SFR 9300BK

EN-13

2020 04/2020

YOGURT

For making homemade yoghurts. Use

boiled or pasteurised milk and ayoghurt

culture. The yoghurt culture can be

commercial unflavoured yoghurt, yoghurt

made earlier, yoghurt powder mixture

available in supermarkets or ayoghurt

culture from ahealth food store.

04:00 40 °C 00:30-9:59 ×

POPCORN

For making popcorn. Popcorn can be

made without oil or in asmall amount

of oil or fat. Simply flavour the finished

popcorn to taste.

00:08 240 °C 00:01-0:15 200–240 °C

MANUAL

Enables all cooking parameters to be

custom set based on recipes, amounts

of ingredients and your personal

preferences.

01:00 240 °C 00:01-9:59 40–240 °C

KEEP

WARM

For maintaining atemperature. The

program keeps food at atemperature of

approx. 80°Cfor the preset or custom

set time.

02:00 80 °C 00:30-9:59 ×

PRESET Delayed start. Enables you to start

cooking at atime of your choosing. 01:00 × 00:01-9:59 ×

Explanations:

× = function is not available or the setting can’t be made

* = Neither time nor temperature can be changed while heating up. When aboil is reached, time can be set in the

range from 0:10 to 0:15 min

Selecting aprogram

■ The programs from the left, centre and right menu can be selected in three ways:

- Using button C6 (function): Each time the button is pressed, programs are cycled through in an anticlockwise

direction, i.e. from left to right.

- Using button C3 (plus) in the stand-by mode: Each time the button is pressed, programs are cycled through in an

anticlockwise direction, i.e. from left to right

- Using button C10 (minus) in the stand-by mode: Each time the button is pressed, programs are cycled through

in aclockwise direction, i.e. from right to left.

Pressing any of the above described buttons is accompanied by ashort beep, flashing of the selected program and

the preset cooking values are shown on the display.

Starting, stopping and finishing aprogram

■ Start the cooking process by pressing button C11 (Start/Stop). The selected cooking program will flash, indicators

C7 will start loading and the preset time will start to countdown.

■ You can pause the cooking process at any time by pressing button C11 (Start/Stop).

■ When the multi-cooker finishes cooking, it will beep 3× and, depending on the selected program or setting, either

switch to the keep warm mode or the energy saving mode, i.e. the display will turn off. In this way the automatic

cooking function is finished.

ADJUSTING THE COOKING PROGRAMS

■ On most programs, it is possible to adjust some or all of the preset cooking parameters based on your needs and

experience. Adjustable parameters are listed in the program overview table.

■ Adjustable parameters can be adjusted both before and during the cooking process. The cooking parameters can

be adjusted at any time by pressing button C11 (Start/Stop).

■

After adjusting the parameters, start the cooking process by pressing button C11 (Start/Stop). The cooking process

will run in the same way as with automatic cooking.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SFR 9300 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info