758412
5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
02/2017
- 5 - Copyright © 2017, Fast ČR, a.s.
EN Food Chopper
User'smanual
■ Prior to using this appliance, please read the users manual
thoroughly, even in cases where you have previously familiarised
yourself with the operation of similar types of appliances. Only
use the appliance in the manner described in this user’smanual.
Keep this user’smanual in a safe place where it can be easily
retrieved for future reference.
■ We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the
vendor or warranty card for at least the duration of the legal
liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance
in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Pulse button
for turning the motor unit
on and o
A2 Motor unit
A3 Bowl cover
A4 Blade assembly
A5 1-litre glass bowl
A6 Rubber anti-slip ring
A7 Storage lid
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging
materials.
2. Thoroughly wash the cover A3, blade assembly A4 and bowl A5
in warm water and neutral kitchen detergent. Then rinse with
clean water and allow it to dry naturally or dry it out thoroughly
using a wiping cloth. The glass bowl A5 can also be washed
in a dishwasher. Other parts are not intended for washing in
adishwasher..
Attention:
When cleaning the blade assembly A4, be very careful not
to injure yourself on its sharp edge.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
1. Before you start assembling or disassembling the appliance,
check that the motor unit A2 is turned o and disconnected
from the power socket and that the rotating parts have come to
acomplete stop.
2. Place the bowl A5 into the anti-slip ring A6 and place it on adry,
even and stable surface.
3. Seat the blade assembly A4 on to the central pin at the bottom
of the bowl A5 and cover the bowl A5 with the cover A3. Push
the cover A3 down along the entire perimeter so that it is
securely seated on the edge of the bowl A5.
4. Place the motor unit A2 on to the cover A3 and check that it has
slid in properly. Now the appliance is assembled.
5. To disassemble proceed in the reverse sequence.
OPERATING THE APPLIANCE
1. Assemble the chopper according to the instructions in the
chapter Assembling and disassembling the appliance. Place
the food into the bowl A5 after seating the blade assembly A4
on the central pin. Fill the bowl A5 to amaximum of ¾ of its
volume.
2. Connect the power cord to an electrical power socket and press
the pulse button A1 to start the chopper. Hold down the button
A1 for several seconds and then release it. When the button
A1 is released, the chopper will stop. If the food inside is not
suciently chopped up, run the chopper again for ashort time.
Short pulse switching will limit excessive pulverisation of the
food.
Attention:
The maximum continuous operating time of the appliance
is 30 seconds. Then allow it to cool down for 2 minutes.
3. If food sticks to the inside of the bowl A5, turn o the chopper
and disconnect it from the power socket. Make sure that the
blade assembly A4 has stopped rotating. Take o the motor
unit A2 and the cover A3. Clean the inside of the bowl A5 using
a spatula. Assemble the chopper, plug the power cord into
apower socket and continue processing food.
4. After you nish using it, disconnect the power cord from
the power socket. Make sure that the blade assembly A4 has
stopped rotating. Take o the motor unit A2 and the cover A3.
First, carefully take the blade assembly A4 out of the bowl A5
and only then empty out its contents.
5. Then clean all used parts according to the instructions in
chapter Cleaning and maintenance.
QUICK GUIDE TO PROCESSING INGREDIENTS
■ First, cut up the food into smaller cubes of approximately
2 × 2 cm and only then process with the chopper. With
vegetables like onion, it is sucient to cut them into quarters.
Ingredients Maximum
load
Processing
time
Meat 300 g 30 s
Fruit and vegetables 200 g 15 s
Hard and semi-hard cheeses 150 g 10 s
Nuts with shells removed 100 g 15 s
Herbs 50 g 10 s
Note:
The above food processing times are only a reference.
The actual processing time depends on the size of
the ingredients, their amount and the required nal
consistency.
CLEANING AND MAINTENANCE
■ Before cleaning it, make sure that the appliance is turned o,
disconnected from the power socket and that the rotating parts
have stopped.
■ Disassemble the appliance into its individual parts. Thoroughly
wash the cover A3, blade assembly A4 and bowl A5 in warm
water and neutral kitchen detergent. Then rinse with clean
water and allow these parts to dry naturally or dry them out
thoroughly using awiping cloth. If the anti-slip ring A6 becomes
soiled, you may wash it in the same way. The glass bowl A5 can
also be washed in adishwasher. Other parts are not intended to
for washing in adishwasher.
Attention:
When cleaning the blade assembly A4, be very careful not
to injure yourself on its sharp edge.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SHB 4330 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info