06/2017
- 5 - Copyright © 2017, F
EN Hand Blender
User'smanual
■ Prior to using this appliance, please read the user’ manual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’smanual. Keep this user’
retrieved for future use
■ We rec
receipt and responsibility statement of the vendor or warran
the duration of the legal liability for unsatisfactory performance or quality. In
the event of transportation, we recommend that you pack the appliance in the
original box from the manufacturer
DESCRIPTION OF
A1 Speed indicator lights
A2 Pulse switch with variable speed
control
A3 Motor unit
A4 Buttons (on both sides of the
motor unit)
serve to release removable
accessories.
A5 Removable stick blender
attachment
A6 Beaker
A7 Anti-slip base pad for the beaker
serves concurrently as lid for the
beaker
A8 Whisk holder
A9 Whisk
A10 Chopper bowl lid
A11 Chopper blade assembly
A12 Chopper bowl, volume 500 ml
A13 Anti-slip feet
Note:
The appliance may be hung on an included wall-mounted holder
The mounting of the holder on to a wall requires the use of scr
which may not be included.
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thor
contact with food using warm water and a neutral kitchen detergent.
rinse them with clean water and allow them to dry naturally or dry them out
thoroughly using aA8 and A10 using adampened
cloth. T
removable attachment of the stick blender A5 , do not submerge the top end
that connects to the motor unit A3 .
3. Do not rinse under water or submerge in water the motor unit A3 and its power
cord.
Attention:
When cleaning the blade assembly of the stick blender A5 and chopper
A11, be especially careful not to injure yourself on the blades
INTENDED USE OF
Stick blender
■ It is suitable for blending soft ingredients and liquids. It is used namely for
preparing baby food, various types of cocktails, sauc
Chopper
■ It is suitable for chopping foods such as meat, semi-hard or hard cheese
vegetables in their raw state, nuts
excessively hard f
Hand mixer
■ After attaching the holder A8 with the whisk A9 to the motor unit A3 , you may
use the appliance as a
batters or for whipping cream, egg whites and cr
thick doughs.
ASSEMBLING AND DISASSEMBLING
■ Before you start assembling or disassembling the appliance, check that the
motor unit A3 is turned o and disconnected from the power socket and that
the rotating parts have come to acomplete stop
Stick blender
1. Attach the slick blender attachment A5 from underneath to the motor unit A3 .
The connection of both parts is indicated by aclick.
2. For blending, use the beaker A6 or another suitable container intended for
coming into contact with food. A7 also serves as alid for
the beaker A6 , when you wish to use it for short term storage of food.
3. During disassemblyA4 and at the same time
remove the stick blender attachment A5 .
Chopper
1. Place the boA12 on an even, dry and stable sur
assembly A11 on to the central pin at the bottom of the bowl A12 .
2. Close the bowl A12 using the lid A10 , whilst ensuring that the blade assembly
shaft A11 ts into the middle part of the lid A10 and that the safety locks along
the sides of the lid A10 slide into the safety system of the bowl A12 .
A10 clockwise all the way.
3. Attach the motor unit A3 to the lid A10 and gently push it down until aclick is
heard. Now the chopper is assembled.
4. During disassemblyA4 and at the same time
remove the motor unit A3 .
Hand mixer
1. Slide the whisk A9 , into the holder A8 , until it clicks in. Before use, always check
that the whisk A9 is securely attached.
2. Attach the holder A8 with the whisk A9 from underneath to the motor unit A3 .
Attachment is indicated by aclick.
3. During disassemblyA4 and at the same time
remove the holder A8 with the whisk A9 .
the assembly.
OPERA
1. Select the type of accessories that you wish to use and assemble the appliance
according to the instructions in the chapter Assembling and disassembling the
appliance.
Attention:
When assembling the chopperA12 only
after placing the blade assembly A11 on to the central pin at the bottom
of the bowl A12 . Do not ll the bowl A12 over the maximum mark.
2. First cut the food that will be placA12 into small cubes
measuring approximately 2 × 2 cm.
cut them into quarters.
3. Connect the motor unit A3 to apower socket. Press the pulse switch A2 to start
the appliance. Regulate the speed by the pressing int
A2. TA2 , the faster it will run.
signalled by indicator lights A1 .
switch A2 is pressed. A2 is released, the appliance will turn o
T
hold the attachment submerged while the appliance is running.
Attention:
The maximum continuous operating time of the appliance is 1 minute
Then allow it to cool down for 3 minut
hard foodstus, in
it to cool down for 1 minute
appliance to cool down for 15 minutes
4. After you nish using it, disc
Make sure that the rotating parts have stopped rotating
appliance into its individual parts. T
instructions in chapter Cleaning and maintenance.
QUICK GUIDE
Stick blender
Ingredients Amount Speed setting Processing time
Baby food 200 g Medium to maximum 30 s
Spreads 200 g Medium to maximum 20 s
Fruit and vegetables (cooked) 200 g Medium to maximum 30 s
Sauces 500 ml Medium to maximum 30 s
Shakes/Cocktails 500 ml Medium to maximum 20 s
Chopper
Ingredients Amount Speed setting Processing time
Meat 250 g Medium to maximum 15 s
Fruit and vegetables 200 g Medium to maximum 15 s
Hard and semi-hard cheeses 100 g Maximum 10 s
Hard baked goods 80 g Medium to maximum 15 s
Nuts with shells removed 150 g Maximum 15 s
Herbs 50 g Medium 10 s
■ First, cut up the food int
process with the chopper
into quarters.
Hand mixer
Ingredients Amount Speed setting Processing time
Egg whites 4 pcs Maximum 60 s
Whipping cream 200 ml Maximum 60 s
Light doughs 500 g Medium to maximum 60 s
■ Whip cream and egg whites in atall narrow beaker
the whisk A9 and the beaker must always be perfectly clean and dry, otherwise
whipping up the egg whites may not succeed.
