Bedienungsanleitung Sencor SHB 5501CH (Seite 8 von 12) (Englisch)

758491

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

EN-8

Stick Blender

SHB 5501CH

ASSEMBLING AND DISASSEMBLING THE APPLIANCE

• Before you start assembling or disassembling the appliance, check that the motor unit A3 is turned o and

disconnected from the power socket and that the rotating parts have come to acomplete stop. Parts that are

connected to the motor unit A3, must be thoroughly dry.

Stick blender

1. Attach the stick blender attachment A5 from underneath to the motor unit A3. The connection of both parts

is indicated by aclick.

2. Blend food in the beaker A6 or in another suitable container intended for coming into contact with food. The

anti-slip base pad Aqd also serves as alid for the beaker A6, when you wish to use it for short term storage of

food.

3. During disassembly, press and hold down the button A4 and at the same time remove the stick blender

attachment A5 from the motor unit A3.

Chopper

1. Place the bowl A9 into the anti-slip base pad A , and on to the central pin at the bottom of the bowl A9 seat

the blade assembly A .

2. Close the bowl using the lid A8, whilst ensuring that the blade assembly shaft ts into the middle part of

the lid A8 and that the safety locks along the sides of the lid A8 slide into the safety system of the bowl A9.

Turn the lid A8 clockwise all the way. This will secure it in place, and is indicated by aclick.

3. Place the motor unit A3 into the hole in the lid A8 and gently push it down until aclick is heard. Now the

chopper is assembled.

4. During disassembly, press and hold down the button A4 and at the same time remove the motor unit A3

from lid A8. Then continue in reverse sequence to the assembly of the chopper.

Hand mixer

1. Slide the beaters A into the holder A7, until they click in. Before use, always check that the beaters A are

securely attached.

2. Attach the holder A7 with the beaters A from underneath the motor unit A3. Attachment is indicated by

aclick.

3. Blend the food in the beaker A6 or in another suitable container intended for coming into contact with food.

The anti-slip base pad Aqd also serves as alid for the beaker A6, when you wish to use it for short term storage

of food.

4. During disassembly, press and hold down the button A4 and at the same time remove the holder A7 with the

beaters A from the motor unit A3. Then continue in reverse sequence to the assembly of the hand mixer.

Grater

1. With blades facing upwards, insert the grating blade A , Aws or Awd into the holder Aqk and push it down

slightly until aclick is heard and the cutting blade slides into the holder Aqk. Seat the shaft of the holder Aqk on

to the central pin at the bottom of the bowl Aql.

2. Cover the bowl Aql using the lid Aqj, whilst ensuring that the safety locks along the sides of the lid Aqj slide

into the safety system of the bowl Aql. Release the safety button located on the grip of the bowl Aql, and turn

the lid Aqj clockwise all the way. Release the safety button. This will secure the lid Aqj in place. Place the bowl

Aql into the anti-slip base pad Aw;.

3. Place the motor unit A3 into the hole A and gently push it down until aclick is heard. Insert the pusher A

into the feed tube A . Now the grater is assembled.

4. To disassemble proceed in the reverse sequence. To take o the motor unit A3 it is necessary to rst press and

hold the buttons A4. This will release the attachment, and the motor unit A3 can be taken out of the hole A

. Before removing the grinding blade A , Aws or Awd from the holder Aqk, rst release it by pushing down

slightly on the latch from underneath the grater.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SHB 5501CH Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info