- 5 - 07/2019
Copyright © 2019, F
EN Stick Blender
User'smanual
■ Prior to using this appliance, please r
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’smanual
retrieved for future r
■ We r
receipt and responsibility statement of the vendor or w
the duration of the legal liability for unsatisfactory per
the event of transportation, we recommend that you pack the applianc
original box from the manufacturer
DESCRIPTION OF
A1 Speed control dial
A2 Backlit pulse button
for turning the motor unit on and off
A3 Motor unit
A4 Buttons (on both sides of the motor
unit)
for releasing removable ac
A5 Removable stick blender attachment
A6 Beaker
A7 Anti-slip base pad for the beaker
A8 Beaters
A9 Beater holder with gear system
A10 Chopper bowl lid with gear system
A11 Chopper blade assembly
A12 Chopper bowl, volume 1 250 ml
A13 Anti-slip base pad for the chopper
bowl
BEFORE FIRST USE
1. T
2.
with food using warm water and aneutral kitchen detergent. Then rinse them with
clean water and allow them to dry naturally or dry them out thoroughly using
a wiping cloth. Clean parts A9 and A10 , which are equipped with a gear system,
only using a
When cleaning the stick blender attachment A5 , do not submerge the end that is
connected to the motor unit A3 .
Attention:
When cleaning the blade assembly of the stick blender A5
and chopper A11 , be especially careful not to injure yourself
on the blades.
INTENDED USE OF
Stick blender
It is suitable for blending soft ingredients and liquids. It is used namely for preparing
baby food, various types of cocktails, sauces
Chopper
It is suitable for chopping foods such as meat, semi-hard or hard cheese
vegetables in their raw state
excessively hard f
Hand mixer
After attaching the holder A9 with the beaters A8 to the motor unit A3 , you ma
the appliance as a hand mixer is suitable for preparing light batters
or for whipping cream, egg whites and creams
ASSEMBLING AND DISASSEMBLING
Before you start assembling or disassembling the appliance, check that the motor
unit A3 is turned off and disconnected from the power socket and that the rotating
parts have come to aA3 ,
must be thoroughly dry.
Stick blender
1. A5 from underneath to the motor unit A3 . The
connection of both parts is indicated by aclick.
2. A6 or another suitable container intended f
into contact with food. A7 also serves as alid for the beaker A6 ,
when you wish to use it for short term storage of food.
3. During disassemblyA4 and at the same time
remove the stick blender attachment A5 frA3 .
Chopper
1. Place the bowl A12 into the anti-slip base pad A13 . On to the centr
bottom of the bowl A12 , seat the blade assembly A11 and turn it clockwise by 90°,
until it is secured in the correct position.
2. A10 , whilst ensuring that the blade assembly shaft A11
fits into the middle part of the lid A10 and that the safety locks along the sides of the
lid A10 slide into the safA12 . TA10 clockwise all the
way
3. Seat the motor unit A3 on to the lid A10 and gently push it down until a
Now the chopper is assembled.
4. During disassemblyA4 and at the same time
remove the motor unit A3 from lid A10 .
assembly of the chopper
Hand mixer
1. A8 , into the holder A9 , until they click in. Before use, always check
that the beaters A8 are securely attached
2. A9 with the beaters A8 from underneath the motor unit A3 .
Attachment is indicated by aclick.
3. During disassemblyA4 and at the same time
remove the holder A9 with the beaters A8 frA3 . Then continue in
reverse sequence to the assembly of the hand mix
OPERA
1.
according to the instructions in the chapter Assembling and disassembling the
appliance.
Attention:
When assembling the chopper
A12 only after placing the blade assembly A11 on to the central
pin on the bottom of the bowl A12 . Do not fill the bowl A12
over the maximum mark.
2. Connect the motor unit A3 to a
power switch A2 will be backlit. Set the required speed using the speed control dial
A1. TA1 clockwise to increase the speed, and anticlockwise
to reduce the speed.
3.
button A2 . Do not set the speed while the appliance is running. The applianc
run as long as the power switch A2 is pressed.
keep the stick blender attachment blade assembly A5 / beaters A8 submerged while
the appliance is running. Also preven
the bowl/beaker in which you are processing itA2 is released
the appliance will stop.
processing food by means of a
pulverisation of the food and optimal results will be achieved
Attention:
The maximum continuous operating time of the appliance
is 1 minute.
When using the appliance to blend sticky or harder foodstuffs
interrupt operation already after 30 seconds.
4. After you finish using it, disc
that the rotating parts have stopped rotating
individual parts. Then clean all used parts according to the instructions in chapter
Cleaning and maintenance.
QUICK GUIDE
Stick blender
Ingredients Amount Speed setting Processing
time
Baby food 300 g Medium to
maximum 45 s
Spreads 200 g Medium to
maximum 30 s
Fruit and vegetables
(cooked) 200 g Medium to
maximum 45 s
Sauces 500 ml Medium to
maximum 45 s
Shakes/Cocktails 500 ml Medium to
maximum 30 s
Chopper
Ingredients Amount Speed setting Processing
time
Meat 300 g Medium to
maximum 30 s
Fruit and vegetables 200 g Medium to
maximum 15 s
Hard and semi-hard
cheeses 150 g Maximum 10 s
