Bedienungsanleitung Sencor SHI 1100 (Seite 5 von 5) (Englisch)

760025

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

- 5 - 06/2019

EN Hair straightening iron

User’manual

■ Prior to using this appliance, please read the user‘smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user‘smanual.

Keep this user‘smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user‘smanual.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor and warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

■ Carefully unpack the appliance and take care not to throw away any part of the

packaging before you find all the parts of the appliance.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Main switch with aLED power

indicator

A2 Swivel power cord end

A3 Hanging Loop

A4 Ironing plates

PURPOSE OF USE AND FEATURES OF THE HAIR STRAIGHTENING

IRON

■ The hair straightening iron is intended exclusively for straightening and styling

human hair. It must never be used for styling wigs, hairpieces, synthetic hair or for

straightening animal fur.

■ The surface of the ironing plates enables operating temperatures from 150 °C to

220 °C.

USE

Turning on and setting the temperature

■ Connect the iron to apower socket.

■ Press button A1. The LED indicator will turn on and the iron will start heating up. The

iron is ready for use after afew moments.

Procedure for ironing hair

■ Wash your hair thoroughly, dry it completely and brush through thoroughly so that

it is smooth and without knots.

■ Separate this prepared hair using clips into equally wide strands (about 5 cm wide).

■ Start to iron the back part of the head at the lower strands of hair – at the root place

the strand of hair between the plates and gently press the handle of the iron. With

asliding motion pull the iron all the way to the ends of the hair.

■ Repeat the procedure for the same strand of hair until you achieve the desired

appearance.

■ Continue in the same way with the remaining strands of hair (first on the front part

of the head and ending at the sides).

■ Before the final combing, allow the hair to fully cool down.

Attention:

Do not touch the ironing plates - there is adanger of burns!

Do not leave the iron in the one spot for longer than 2 seconds

as hair could be burnt.

Use the iron only on healthy hair. Do not use the iron on oily,

stuck together or sweaty hair. On perm or coloured hair only use

the iron infrequently.

Tip:

Adjust the speed of movement of the iron on the hair strands according

to their character (fine hair is more sensitive to ahot surface and requires

asignificantly shorter ironing time than stronger hair).

Turning off the iron

■ When you have finished ironing, turn off the iron by pressing button A1. The LED

indicator will turn off.

■ Disconnect the iron from the power socket.

Attention:

Allow the iron to fully cool down before storing!

CLEANING AND MAINTENANCE

Attention:

Clean the ironing plates only after they have fully cooled down!

No part of the iron may be submerged in water or washed under

running water!

To clean the outside parts of the iron and the ironing plates, use afine cloth dipped

in lukewarm water. Do not use aggressive cleaning agents, paint thinners or solvents.

Using these solutions could damage the surface of the product. The surface of the

ironing plates does not require any additional cleaning.

STORAGE

When not using the iron for an extended period of time, do the following:

■ Clean the iron as described in chapter Cleaning and maintenance.

■ Place the iron in asafe, dust-free, clean and dry place that is out of reach of children.

TECHNICAL SPECIFICATIONS

Rated voltage range. .................................................................................................... 100–240 VAC

Rated frequency........................................................................................................................50/60 Hz

Rated power ................................................................................................................................ 40-45 W

Electrical shock protection class ........................................................................................................ II

EXPLANATION OF TECHNICAL TERMINOLOGY

Safety class for electrical shock protection:

Class II – Electrical shock protection is provided by double or heavy-duty

insulation.

Amendments to text and technical parameters are reserved.

INSTRUCTIONS AND INFORMATION REGARDING THE

DISPOSAL OF USED PACKAGING MATERIALS

Take the packaging material to adesignated municipal waste facility.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used

electric or electronic products must not be added to ordinary

municipal waste. For proper disposal and recycling, take these

products to designated collection points. Alternatively, in some

European Union states or other European countries you may return

your appliances to the local retailer when buying an equivalent new

appliance. Correct disposal of this product helps save valuable natural

resources and prevents damage to the environment caused by

improper waste disposal. Ask your local authorities or collection facility for more

details. In accordance with national regulations penalties may be imposed for the

incorrect disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your vendor or supplier

for the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product,

request the necessary information about the correct disposal method from the local

council or from your vendor.

This appliance meets all the basic requirements of EU directives related

to it.

Sencor SHI 1100 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info