Bedienungsanleitung Sencor SHI 5200 (Seite 5 von 6) (Englisch)

760029

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

EN Hair straightening iron

User'smanual

■ Prior to using this appliance, please read the user‘smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual. Keep

this user‘smanual in asafe place where it can be easily retrieved for future use. In the

event that you hand this appliance over to somebody else, make sure to also include

this user‘smanual.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event of

transportation, we recommend that you pack the appliance in the original box from

the manufacturer.

■ Carefully unpack the appliance and take care not to throw away any part of the

packaging before you find all the parts of the appliance.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Ironing plates

A2 Cold steam outlet

A3 Display

A4 Power and temperature button

A5 Cold steam On/Off button

A6 Arm lock

A7 Swivel power cord end

A8 Hanging loop

B1 Removable water tank lid

B2 Water tank

B3 Water tank filling hole cap

PURPOSE OF USE AND FEATURES OF THE HAIR STRAIGHTENING

IRON

■ The hair straightening iron is intended exclusively for straightening and styling

human hair. It must never be used for styling wigs, hairpieces, synthetic hair or for

straightening animal fur.

■ The iron is equipped with an automatic safety shut-off function, that turns it off after

60minutes of inactivity.

■ The surface of the ironing plates enables operating temperatures from 170°C to 230°C.

APPLICATION

TURNING ON AND SETTING THE TEMPERATURE

■ Connect the iron to apower socket.

■ Hold down button A4. The appliance will beep, the steam symbol will be lit and the

default temperature of 170 °C will start flashing on the display and the iron will start

heating up. When the temperature is reached, the value will remain permanently lit.

■ By repeatedly pressing button A1, other temperatures are selected in the order 170°C,

190°C, 210°Cand 230°C.

TEMPERATURE DEPENDING ON HAIR TYPE

■ The suitable temperature for straightening hair depends on the hair structure.

Depending on the type of hair, an incorrectly selected temperature may cause the hair

to dry out, become brittle or in the worst case to burn. Therefore, first try ironing at

alow temperature (170°C) and set ahigher temperature only when necessary.

■ The information contained in the following table is for reference purposes only. It may

differ depending on hair type.

Hair type Temperature

Fine, damaged, discoloured, highlighted or dyed hair 170°Cto 190°C

Normal, lightly wavy hair 190°Cto 210°C

Very heavy, curly, unyielding hair 210°Cto 230°C

COLD STEAM FUNCTION

■ The cold steam function helps achieve better hair ironing results. The function is

automatically activated when the iron is turned on using button A4.

■ Cold steam is emitted from the vents A2 every time the arms of the iron are closed.

■ To deactivate the cold steam function, press button A5. The steam symbol on the

display will turn off.

Attention:

Do not activate the cold steam function when the water tank

is empty.

AUTOMATIC SHUT-OFF FUNCTION

■ If no action is taken after turning on the iron, i.e. no button is pressed, then for safety

reasons, the iron will turn off automatically after 60minutes of inactivity. It will start

again after button A4 is pressed.

Attention:

The automatic shut-off is intended only for cases, where you

forget to turn off the iron using button A4. Do not use the

automatic shut-off to intentionally turn off the iron.

FILLING THE COLD STEAM TANK

Attention:

Prior to filling the water tank, always disconnect the iron

from the power socket.

■ Remove the lid B1 and take out the water tank B2.

■ Flip open the cap B3 of the filling opening and pour in cold, clean water and close the

cap. Use asuitable wiping cloth to wipe the entire water tank dry.

■ Insert the water tank back into the iron and close the cap B1.

PROCEDURE FOR IRONING HAIR

■ Wash your hair thoroughly, dry it completely and brush through thoroughly so that it

is smooth and without knots.

■ Separate this prepared hair using clips into equally wide strands (about 5cm wide).

■ Start to iron the back part of the head at the lower strands of hair – at the root place

the strand of hair between the plates and gently press the handle of the iron. With

asliding motion pull the iron all the way to the ends of the hair.

■ Repeat the procedure for the same strand of hair until you achieve the desired

appearance.

■ Continue in the same way with the remaining strands of hair (first on the front part of

the head and ending at the sides).

■ Before the final combing, allow the hair to fully cool down.

Attention:

Do not touch the ironing plates - there is adanger of burns!

Do not leave the iron in the one spot for longer than

5seconds as hair could be burnt.

Use the iron only on healthy hair. Do not use the iron on oily,

stuck together or sweaty hair. On perm or coloured hair only

use the iron infrequently.

Tip:

Adjust the speed of movement of the iron on the hair strands according

to their character (fine hair is more sensitive to a hot surface and

requires asignificantly shorter ironing time than stronger hair).

OVERHEATING PROTECTION

■ The iron is equipped with anti-overheating protection. If the iron overheats, all the

temperature values on the display will start to flash at the same time and no buttons

will react to being touched. If this happens, disconnect the iron from the power socket

and allow it to cool down. After reconnecting it to apower socket and turning it on,

the iron will function as normal. If not, do not use the iron and contact aservice centre.

TURNING OFF THE IRON

■ When you have finished ironing, turn off the iron by holding down button A4 until the

display turns off. Turning off is also indicated by abeep.

■ Disconnect the iron from the power socket.

Attention:

Allow the iron to fully cool down before storing!

CLEANING AND MAINTENANCE

Attention:

Clean the ironing plates only after they have fully cooled

down!

No part of the iron may be submerged in water or washed

under running water!

■ To clean the outside parts of the iron and the ironing plates, use afine cloth dipped

in lukewarm water. Do not use aggressive cleaning agents, paint thinners or solvents.

Using these solutions could damage the surface of the product. The surface of the

ironing plates does not require any additional cleaning.

STORAGE

When not using the iron for an extended period of time, do the following:

■ Clean the iron as described in chapter Cleaning and maintenance.

■ Place the iron in asafe, dust-free, clean and dry place that is out of reach of children.

■ If you wish to secure the arms against opening, press button A6.

TECHNICAL SPECIFICATIONS

Rated voltage range ...........................................................................................................100−240 VAC

Rated frequency ...............................................................................................................................50/60 Hz

Rated power ..............................................................................................................................................50 W

Temperature range ................................................................................................................170 to 230°C

Electrical shock protection class ...............................................................................................................II

Sencor SHI 5200 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info