756642
9
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
EN 7
EN
Revision 06/2020Copyright © 2020, Fast ČR, a. s.
Important safety instructions
Do not leave astatic image on the LCD panel for
more than 2 hours. This may result in adamaged
panel.
This is typical for liquid crystal displays and
does not indicate any problems. LCD screens are
made using precision technology to provide even
the finest image details. Several defective pixels
can appear on the screen from time to time, indicated as red, blue, green or black
dots (up to 0.001% of the total pixel count of the screen). This does not affect the
characteristics and the effectiveness of your TV set.
Notes on the USB connector:
USB memory devices require being connected directly into the device. To prevent
afailing or interrupting data transfer, do not use USB extension cable. Electrostatic
discharge can cause the device to not function. In this case, the user must restart the
device.
Before using aUSB memory device, test that it communicates with the device and
its read and write speed.
For maximum reading speed, we recommend to keep the disc space defragmented.
Use file system FAT32, single partition, no protection.
If the reading/writing of the memory device is not smooth, it can lead to undesirable
effects, such as interruption of the image (blocky image) or failure of whole frames,
audio malfunctions, and in extreme cases, stopping of the operation. Unexpected
behaviour of the connected storage device, or the presence of viruses and other
malicious software can cause the device to stop the functioning with the need to
restart it.
The USB connector is astandard type and cannot power aUSB device with ahigh
power consumption (e.g. hard drives). Use adevice with its own power and power
them with their own power supply.
The device was designed with respect to maximum compatibility with memory
devices. Considering the variety of devices on the market, we cannot guarantee
compatibility with every USB device available. Should you run into any issues, try
formatting the memory device directly in the device. Should problems persist, use
another memory device.
Due to wide range of the USB devices on the market, it is not possible to ensure
compatibility of the device with all types of USB devices.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SLE 32S601TCS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sencor SLE 32S601TCS

Sencor SLE 32S601TCS Bedienungsanleitung - Polnisch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info