Bedienungsanleitung Sencor SLE 50US800TCSB (Seite 7 von 42) (Englisch)

756598

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

EN 5

Important safety instructions

Repairs and maintenance

• To avoid risks of electric shock or ﬁre, do not remove the device from the case – the

case does not contain components that the user could repair or adjust without the

necessary equipment and qualiﬁcation. Refer to aprofessional service centre if your

device requires service.

• In the event of any unusual occurrences during the use of the device, e.g. smelling

the characteristic smell of burning insulation or even seeing asmoke, turn the device

off immediately, disconnect the power supply and wait with continuing use of the

device until you learn the result of its inspection by the service personnel.

• Leave all service to qualiﬁed service personnel. Service is necessary when the device

is damaged in any way, for example in case of damage to the power cord, spilling

liquid on the device, intrusion of foreign objects into the device, when the device is

exposed to rain or moisture, if the device does not function in the usual manner or if

it fell.

• When repairing or replacing acomponent of the device, make sure the repair

technician used spare parts deﬁned by the manufacturer to ensure the replaced

components have the same features as the original. Unauthorized replacements can

cause ﬁre, electric shock or other risks.

• Prior to cleaning, moving or other maintenance work, unplug the cord (adapter) from

the socket.

• Clean the device with adry cloth only. Do not use gasoline, thinner or other solvents

or abrasives, scouring pads, or sponges with scouring pads to clean the device.

Note:

Do not throw the device into your common household waste. Respect laws and

regulations when disposing of the machine.

Remote controller and battery

• Do not expose the remote controller or battery to direct sunlight, or close to heat

sources, like radiators, heat exchangers, stoves or other appliances (including

ampliﬁers) producing heat. Do not use and do not leave the device near an open ﬁre.

Make sure the sensor is not exposed to intense light (e.g. sunlight) or ﬂuorescent tube

light, which could lower the efﬁciency and reliability of the remote controller.

• The remote controller or battery must not be exposed to dripping or running water

and objects ﬁlled with liquid, e.g. vases, shall not be placed on the device. Protect the

remote controller against becoming wet, sprayed or poured on by any liquid. Do not

use outdoors. Failure to respect these instructions can lead to the remote controller or

battery becoming damaged.

• Do not use the device close to water.

• The impact the battery disposal has on the environment shall be monitored carefully.

• Using the batteries incorrectly can result in leakage and corrosion. Follow the

following instructions to ensure proper remote control operation:

– Do not insert the batteries in the wrong direction.

– Do not charge, heat, open or short the batteries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SLE 50US800TCSB Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor SLE 50US800TCSB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info