Bedienungsanleitung Sencor SLE 65US600TCSB (Seite 5 von 34) (Englisch)

756601

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

EN 3

Important safety instructions

• This device shall not be kept in aclosed area, such as alibrary or shelf, provided

sufﬁcient ventilation cannot be provided or the manufacturer'sinstructions cannot be

followed.

• Do not place any objects into the air vents or any other holes. Risk of touching

components with dangerous voltage or shorting parts that could cause ﬁre or electric

shock. Do not pour any liquids into the device. Do not install the device in direct

sunlight, or close to heat sources, like radiators, heat exchangers, stoves or other

appliances (including ampliﬁers) producing heat. High temperatures shorten the life of

the electronic components of the device signiﬁcantly. Do not use and do not leave the

device near an open ﬁre.

• The device must not be exposed to dripping or running water and you must not place

upon it objects ﬁlled with liquid, e.g. vases. Protect the device against becoming wet,

sprayed on or poured on by any liquid, do not leave or install the device outdoors. Do

not use the device outdoors. You risk electric shock or ﬁre by not adhering to these

instructions.

• Do not use the device close to water.

• Handle the glass panels and cover of the device with care. The glass screen can

break on impact and cause serious injury.

• Make sure the power cord is not stepped on or compressed, especially near the plug

and point leading from the device or adapter. The power plug (adapter) is used to

disconnect the system and must be easy to access.

• Do not use adevice with adamaged power cord or plug. If the power cord or plug is

damaged, turn off the device, disconnect it from the power supply and contact your

authorized repair shop. Only aprofessional can replace adamaged power cord or

plug. Under no circumstances should you attempt to replace the power cord or plug

yourself.

• Do not attempt to bypass the safety function of the polarized plug. If the plug cannot

be plugged into your socket, refer to an electrician to replace your obsolete socket.

Before plugging the device into the socket make sure the voltage in your socket

corresponds with the voltage on the label of the device or power adapter. If you are

not sure of the type of power source you have in your home, refer to your vendor or

local power company.

• Before switching, make sure that all network connections are made properly and in

accordance with the manufacturer'sinstructions. Switch the device off and unplug it

from the socket before plugging in or changing the connection of the device.

• Remember to always unplug the plug (adapter) from the socket before unplugging

the power cord.

• Plug the power cord into an independent socket. Do not overload wall sockets using

extension cords or uniﬁed sockets. Risk of electric shock.

• Hold the power cord by the plug and not by the cable when pulling out from the

socket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SLE 65US600TCSB Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor SLE 65US600TCSB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info