756738
9
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
EN - 7
RADIO OPERATION
TUNING RADIO STATIONS
1. Press the Source button on unit or on remote control to select the TUNER FUNCTION, this unit
is designed for FM ONLY.
2. Tune to desired station by pressing TUN+/ or TUN-/ keyonunitorremotecontrol,the
display will show the band frequency. Example: FM 97,10 MHz. If the radio receive Stereo signal,
“STEREO” will show on the display.
3. ExtendFMTELESCOPICANTENNAtoitsfulllengthandgentlymovetheunitbackandforthto
get the best reception, or place the unit in an open location.
4. Toturno󰀨theradio,presstheSource Button on unit or on remote control to switch to other
functions or press STANDBYbuttononunitoronremotecontroltoturno󰀨theunit.
RADIO AUTO SCAN (SEARCH)
Press and hold the /Scan/PAIR button on unit or keyonremotecontrol,theunitwillconduct
auto scan and program until having found a strong signal. The unit will start to broadcast the P01
aftersearchingnished.
Press the M.+ or M.- on unit or M. UP/DOWNkeyontheremotecontroltochoosenextprogrammed
station.
RADIO STATION MEMORY OPERATION
You may pre-store 30 (FM) radio stations in memory for your preference, so as you can listen to your
desiredstationdirectlyandquickly,noneedtotuningandsearchforagain.
1. Press TUN+/ or TUN-/ to select a desired station.
2. Press Mem./ button on unit or press MEM KEY on remote control, P01 “ willashonthe
display.
3. Press M.+ and M.- on unit or M. UP/DOWN remote control to choose the desired sequence you
want to store, then press the Mem./ button on unit or press MEM KEY on remote control again
to enter.
4. Search another station, repeat steps (1) & (2) until all desired stations stored. Up to 30 stations
can be programmed.
5. Press the 10/Fold./M- or 10/Fold./M+ on the unit or on remote to listen to the stored station
directly.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SPT 5800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info