759460

Sencor SRV 2230 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/11
Nächste Seite
- 8 - Copyright © 2020, Fast ČR, a.s. 07/2020
EN Robotic vacuum cleaner
User'smanual
BEFORE FIRST USE
■ Prior to using this appliance, please read the user‘smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user‘smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user‘smanual.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Bumper bar with an anti-collision
sensor
A2 Start button for automatic clean /
indicator light
A3 Lid
A4 Main switch
A5 Power adapter connector socket
A6 Latch
A7 Dust container compartment
A8 Exhaust hole
A9 Lid latch hole
A10 Dust container cleaning brush
A11 Dust container
A12 HEPA filter (highly effective air-
borne particle filter able to capture
even the finest dust particles)
A13 HEPA filter holder
A14 Dust container lid
A15 Bottom anti-fall sensor, central
A16 Charging contacts
A17 Left rotary brush (L)
A18 Bottom anti-fall sensor, left
A19 Left motorised rubber wheel
A20 Battery compartment cover
A21 Central rotary brush
A22 Suction hole (underneath the rotary
brush cover)
A23 Right rotary brush (R)
A24 Front swivel wheel
A25 Bottom anti-fall sensor, right
A26 Right motorised rubber wheel
A27 Latches for attaching the water tank
with mop
B1 Power adapter
B2 Power adapter plug
B3 Charging station
B4 Power adapter plug socket
B5 Charging contacts
C1 Battery compartment
C2 Battery insertion tube
C3 Robotic vacuum cleaner connector
C4 Battery connector
C5 Insulation tape for easier battery
removal
C6 Battery
D1 Water tank
D2 Water tank release latch (on both
sides)
D3 Filling opening cap
D4 Duster
D5 Duster fastening velcro strips
E1 Remote control
E2 Display
E3 Scheduled cleaning setting mode
E4 Return to the charging station
button
E5 Forward button
E6 Left button
E7 Right button
E8 Reverse button
E9 Vacuum cleaner start / off button
E10 Cleaning mode selection button
E11 Time setting button
E12 Maximum cleaning mode in which
the vacuum cleaner cleans
until the battery is almost flat.
E13 Battery compartment cover
E14 Battery compartment (2pcs AAA x
1.5V)
F1 Latches
F2 Rotary brush cover
F3 Rotary brush
PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM
CLEANER
■ The robotic vacuum cleaner is intended for cleaning various types of hard floors
such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with alow
pile height. While vacuuming, it effectively combines various routes to optimally
clean the entire floor area.
■ The suction hole effectively removes hair, animal fur, etc. The two side rotary brushes
brush dirt out of hard-to-reach places along walls and furniture and out of corners.
The motorised rubber wheels protect sensitive floors against scratching and can
travel over threshold strips up to aheight of 1 cm and ride on to a2 cm high carpet.
■ The suspended bumper enables the vacuum cleaner to dampen the approach to an
obstacle and to efficiently clean around it. The infrared sensors in the front bumper
prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in
rooms with stairs is made possible by the bottom anti-stair-fall sensors.
■ Another advantage the a robotic vacuum cleaner is the mop function, which
enables dry and wet wiping of smooth hard floor surfaces. While wiping, the robotic
vacuum cleaner vacuums small bits of dirt and dust from the floor to prevent the
duster from being excessively soiled during the cleaning cycle.
■ For easy identification of the operating state, the button on the top cover has an
indicator light the colour of which indicates low battery voltage (lit red), battery
charging (flashing red), full charge and operation (lit blue). Error states are then
indicated by various numbers of flashes or colour combinations, see chapter
TROUBLESHOOTING. Apart from the indicator lights, the vacuum cleaner also
has audio signals that accompany certain functions or error states of the vacuum
cleaner, see chapter AUDIO SIGNALS.
PREPARING THE ROBOTIC VACUUM CLEANER FOR OPERATION
INSTALLING AND USING THE ROTARY BRUSHES
■ The rotary brushes A17 and A23 are intended for smooth floor surfaces and ensure
effective cleaning in corners, along walls and furniture.
■ Turn the vacuum cleaner upside down. Gradually push the rotary brushes precisely
and with force on to the pins that are intended for them. While doing this, make sure
that the marks L and R both on the brushes and on the vacuum cleaner match. Turn
the robotic vacuum cleaner back over to the operating position.
■ When using the vacuum cleaner to clean rooms with carpets, remove the rotary
brushes. When removing them, proceed in the reverse sequence to their installation.
INSERTING AND REMOVING THE BATTERY
■ The robotic vacuum cleaner is equipped with aLi-ion battery C6. If the battery is
packed separately, it is necessary insert it into the vacuum cleaner before first use.
Use only the original battery type.
■ Make sure that the vacuum cleaner is turned off with the main switch A4. Turn the
vacuum cleaner upside down and screw off the cover A20.
■ Remove the connector C3 from the battery compartment C1.
■ Slide the battery into the tube C2 and connect the battery connector C4 to vacuum
cleaner connector C3.
■ Screw the cover A20 back on and turn the vacuum cleaner back over to the
operating position.
■ Remove the battery in reverse sequence. Prior to removing the battery, always check
that the vacuum cleaner is turned off using the main switch A4. To make removal
easier, use the two insulating strips C5.
■ When the vacuum cleaner will not be used for an extended period of time, take out
the battery and store it in adry, clean and cool place out of children‘sreach.
LOCATION OF THE CHARGING STATION
■ The charging station B3 serves to automatically recharge the battery and the
vacuum cleaner must have good access to it.
■ Locate the charging station against awall on ahard, even and dry surface within
reach of a power socket. Make sure that there are no stairs or obstacles within
adistance of 1m on the left and right of the charging station and within adistance
of 2 m in front of the charging station, that would prevent the robotic vacuum
cleaner from finding the charging station and docking successfully.
■ Insert the power adapter plug B2 into socket B4 of the charging station, and insert
the power cord plug into apower socket. Place the power cord in such away that it
does not tangle into the cleaning brushes of the robotic vacuum cleaner.
■ In the event that the vacuum cleaner is not used for an extended period of time,
disconnect the charging station from the power socket and store it in adry, clean
and cool place.
CHARGING THE BATTERY FOR THE FIRST TIME
Note:
Prior to charging the battery, the vacuum cleaner must be turned on
using the main switch A4.
■ Before using the vacuum cleaner for the first time, it is necessary to fully charge the
battery for at least 7 hours. Thereafter, astandard charge will take approximately
4 hours.
■ Check that the charging station B3 is correctly positioned and connected to apower
socket according to chapter Location of the charging station. Turn on the main
switch A4 of the vacuum cleaner, grasp the robotic vacuum cleaner and manually
place it into the charging station so that the charging contacts A16 on the underside
of the vacuum cleaner and the charging contacts B5 on the charging station are
connected. When the contacts are connected, the charging process will start.
■ The vacuum cleaner can also be charged without using the charging station. Insert
the plug B2 of the power adapter B1 into socket A5 of the vacuum cleaner, and
insert the power cord plug into apower socket.
■ During the charging process, the indicator light on button A2 will flash red.
■ When the battery is fully charged, the indicator light of switch A2 will remain
permanently lit blue and the process will end automatically. The vacuum cleaner
is now ready for use.
INSERTING AND REPLACING BATTERIES IN THE REMOTE CONTROL
■ Push down the latch of cover E13 on the rear side of the remote control E1 to release
it and remove the cover.
■ Insert two type AAA (1.5 V) batteries into the remote control. When inserting the
batteries, ensure the correct polarity as shown inside the battery compartment E14.
Put the cover E13 back on and click it into place.
■ In the event that the batteries are flat, replace them with new ones. Do not combine
various types of batteries or new and old batteries.
■ The signal range of the remote control is approximately 6 m.
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SRV 2230 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info