■Prior to cleaning it, always turn off the vacuum cleaner using the main switch A3.
■For cleaning, never use abrasive cleaning products, solvents, etc.
■Neglecting cleaning and maintenance may negatively affect the working order of
the vacuum cleaner and lead to its reduced performance.
DUST CONTAINER AND DUST FILTER
■Empty out the dust container A5 after every use and clean it regularly. Press latch A7
to slide the dust container out of the vacuum cleaner, open it and tip out the dirty
material. For hygiene reasons, we recommend doing this away from living areas.
■Release the filter holder F1 and the dust filter F2 and take them out of the water
tank.
■Wash both parts of the dust container under running water and dry it well.
Note:
The inside of the dust container does not need to be washed after every
use, it is sufficient to wipe it out with awet wiping cloth.
■Tap out the dust filter and its holder or clean these parts using the brush F3. Check
the condition of the filter and if damaged, replace it with anew one. Insert the filter
back into the holder and into the dust container. Secure it in place by turning the
grip.
■Insert the dust container back into the vacuum cleaner.
Attention:
Do not wash the dust container or the dust filter in adishwasher.
The dust filter must not be washed using water.
Before putting the vacuum cleaner back into operation, check
that the dust filter is in its location. Otherwise the vacuum
cleaner may be damaged.
MOP UNIT
■After every dry or wet wiping, remove the mop fabric, wash it by hand in lukewarm
water with the addition of asmall amount of gentle washing powder and allow it
to dry naturally.
■Slide the dust container E1 out of the water tank E2, open it and tip out any dirty
material. For hygiene reasons, we recommend doing this away from living areas.
Empty out the dust container after every use and clean it regularly.
■Take the filter holder G1 and the dust filter G2 out of the dust container. Tap out the
dust filter and its holder or clean these parts using the brush. Check the condition
of the filter and if damaged, replace it with anew one. Insert the filter back into the
holder and into the dust container.
■Wash the dust container under running water and dry it well.
■Wipe the water tank using alightly dampened cloth and then wipe it dry. Take
special care to ensure that the contacts E6 are dry.
■Return the closed dust container back into the water tank.
CENTRAL ROTARY BRUSH
■Push on the latches H1 of the central rotary brush cover H2 and take the cover out
together with the brush.
■Use adry wiping cloth to clean out the area in which the rotary brush is housed.
Clean out the suction hole as described in the previous paragraph.
■Remove any dirt and material (dust, wound on hair, animal fur, etc.) from the rotary
brush and the bearings H4.
■Reinsert the rotary brush and its cover.
SUCTION HOLE
■The suction hole A19 is located underneath the central rotary brush A21, therefore,
take it out before cleaning the suction hole. With repeat use, dust and dirt may
accumulate around the suction hole, which may manifest itself through suction
decreased efficiency. Remove the dirt and dust from the suction hole using asoft
brush. Regularly clean the suction hole to ensure maximum suction power.
ROTARY BRUSHES
■Take out the rotary brushes A11 and A15 by pulling them upwards. Remove any
dust and dirt from the location where the brushes were mounted.
■Remove all dust and dirt from the brushes. If necessary you may wash the brushes
under running water. If the bristles were deformed while the vacuum cleaner was
running, dip them in warm water to allow them to return to their original shape.
Allow the brushes to dry before reattaching to the vacuum cleaner.
■After cleaning them, reattach them.
Note:
The rotary brushes become worn out when used. After acertain time it
is necessary to replace the used brushes with new ones. To order new
brushes, please contact your vendor or an authorised service centre.
COMPLETE ROBOTIC VACUUM CLEANER
■Regularly wipe the surface of the vacuum cleaner including the control panel and
the panoramic camera using a soft dry wiping cloth.
■At least once per week or more frequently, clean the front swivel wheel A9, the
motorized wheels A13 and A16, the suction hole A19, rotary brushes A11 and A15
and the bottom sensors A10, A12 and A14.
■First remove any coarser dirt from the front swivel wheel and the motorised wheels.
Then clean them around their entire perimeter using alightly dampened cloth and
wipe them dry. Do not forget to also clean the area around the wheels.
■Wipe the sensors on the underside of the vacuum cleaner using asoft dry wiping
cloth or cotton bud.
CHARGING STATION
■At least once per week, clean the surface of the charging bast B4 including the
charging contacts B5 using asoft dry wiping cloth.
STORAGE
■When not using the vacuum cleaner for an extended period of time, do the
following:
■Clean the vacuum cleaner as described in chapter CLEANING AND MAINTENANCE.
■Remove the battery from the vacuum cleaner as described in chapter INSERTING
AND REMOVING THE BATTERY.
■Disconnect the charging station from the power socket.
■Store the vacuum cleaner with all its accessories in adry, clean and cool place.
■To prevent the panoramic camera from being damaged, do not place any other
items on the vacuum cleaner when it is stored.
TECHNICAL SPECIFICATIONS
Robotic vacuum cleaner
Dimensions (diameter × height) ............................................................................... 335 × 79 mm
Weight ................................................................................................................................................2.5 kg
Operating time per single charge ...........................................................................up to 120 min
Operating time per single charge when mop is used ............................................90-110 min
Dust container capacity .............................................................................................................475 ml
Water tank capacity ..........................................................................................................................0.2 l
Power adapter
Rated voltage range ....................................................................................................100−240 VAC
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Sencor SRV 8250 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
