759461

Sencor SRV 9250 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/11
Nächste Seite
- 8 - 07/2019
Copyright © 2019, Fast ČR, a.s.
EN Robotic vacuum cleaner
User'smanual
BEFORE FIRST USE
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Control panel
A2 Bumper bar with an anti-collision
sensor
A3 Laser navigation module
A4 Main switch
A5 Power adapter connector socket
A6 Dust container
A7 2-in-1 mop unit
Consists of awater tank, dust
container and amop fabric
A8 Container release latch
A9 Charging contacts
A10 Front swivel wheel
A11 Bottom anti-fall sensor, central
A12 Left rotary brush (L)
A13 Bottom anti-fall sensor, left
A14 Left motorised rubber wheel
A15 Bottom anti-fall sensor, right
A16 Right rotary brush (R)
A17 Right motorised rubber wheel
A18 Battery compartment cover
A19 Central rotary brush compartment
A20 Suction hole
A21 Central rotary brush cover
A22 Central rotary brush
B1 Power adapter
B2 Power adapter plug
B3 Power indicator
B4 Charging station
B5 Charging contacts
B6 Power adapter plug socket
C1 Remote control
C2 Display
C3 Scheduled cleaning setting mode
C4 Return to the charging station
button
C5 Forward button
C6 Left button
C7 Right button
C8 Reverse button
C9 Vacuum cleaner start / off button
C10 Cleaning mode selection button
C11 Time setting button
C12 Maximum cleaning mode in which
the vacuum cleaner cleans until the
battery is almost flat.
C13 Battery compartment cover
C14 Battery compartment
(2pcs AAA × 1.5V)
D1 Power button D2 Wi-Fi indicator
E1 Dust container
E2 Water tank
E3 Mop fabric
E4 Duster fastening velcro strips
E5 Filling opening cap
E6 Container contacts
F1 HEPA filter holder
F2 HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
F3 Cleaning brush
G1 HEPA filter holder
G2 HEPA filter
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
H1 Latches
H2 Rotary brush cover
H3 Rotary brush
H4 Brush bearings
I1 Magnetic tape
PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM
CLEANER
■ The robotic vacuum cleaner is intended for cleaning various types of hard floors
such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with alow
pile height. While vacuuming, it effectively combines various routes to optimally
clean the entire floor area.
■ The suction hole effectively removes hair, animal fur, etc. The two side rotary brushes
brush dirt out of hard-to-reach places along walls and furniture and out of corners.
The motorised rubber wheels protect sensitive floors against scratching and can
travel over threshold strips up to aheight of 1 cm and ride on to a2 cm high carpet.
■ The suspended bumper enables the vacuum cleaner to dampen the approach to an
obstacle and to efficiently clean around it. The infrared sensors in the front bumper
prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in
rooms with stairs is made possible by the bottom anti-stair-fall sensors.
■ Another advantage of the a robotic vacuum cleaner is the mop function, which
enables dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum
cleaner vacuums small bits of dirt and dust from the floor to prevent the mop fabric
from being excessively soiled during the cleaning cycle. When the vacuum cleaner
finishes cleaning, it will automatically shut off the supply of water and thereby limit
it leaking on to the floor.
■ For easy identification of the operating state, the button on the cover has an
indicator light the colour of which indicates low battery voltage (lit red), battery
charging (flashing alternately red and blue), full charge and operation (lit blue).
Apart from the indicator lights, the vacuum cleaner also has audio signals and voice
messages that accompany certain functions or error states of the vacuum cleaner,
see chapter VOICE MESSAGES.
■ The remote control facilitates convenient control, enabling the vacuum cleaner
to be turned on and off, to be set to the automatic cleaning mode, to select an
operating mode, to send the robotic vacuum cleaner to the charging station or to
set scheduled cleaning.
■ The vacuum cleaner is equipped with GYRO MAPPING function (orientation in
space), which can identify the space geometry of a room in which it is cleaning,
thereby the vacuum cleaner is able to better clean the floor. The vacuum cleaner
is also equipped with laser navigation by means of which it maps out each room
and then starts to clean it systematically. Both functions are built-in and cannot be
affected in any way.
PREPARING THE ROBOTIC VACUUM CLEANER FOR OPERATION
INSTALLING AND USING THE ROTARY BRUSHES
■ The rotary brushes A12 and A16 are intended for smooth floor surfaces and ensure
effective cleaning in corners, along walls and furniture.
■ Turn the vacuum cleaner upside down. Gradually push the rotary brushes precisely
and with force on to the pins that are intended for them. While doing this, make sure
that the marks L and R both on the brushes and on the vacuum cleaner match. Turn
the vacuum cleaner back over to the operating position.
■ When using the vacuum cleaner to clean rooms with carpets, remove the rotary
brushes. When removing them, proceed in the reverse sequence to their installation.
INSERTING AND REMOVING THE BATTERY
■ The robotic vacuum cleaner is equipped with aLi-ion battery. If the battery is packed
separately, it is necessary insert it into the vacuum cleaner before first use. Use only
the original battery type.
■ Make sure that the vacuum cleaner is turned off with the main switch A4. Turn the
vacuum cleaner upside down and screw off the cover A18.
■ Remove the vacuum cleaner connector from the battery compartment. Connect the
battery connector to it. The battery can only be connected in one direction.
■ Screw the cover A18 back on and turn the vacuum cleaner back over to the
operating position.
■ Remove the battery in reverse sequence. Prior to removing it, always check that the
vacuum cleaner is turned off using the main switch. The fabric strips on the body of
the battery make battery removal easier.
■ When the vacuum cleaner will not be used for an extended period of time, take out
the battery and store it in adry, clean and cool place out of children'sreach.
LOCATION OF THE CHARGING STATION
■ The charging station B4 serves to automatically recharge the battery and the
vacuum cleaner must have good access to it.
■ Locate the charging station against awall on ahard, even and dry surface within
reach of a power socket. Make sure that there are no stairs or obstacles within
adistance of 1m on the left and right of the charging station and within adistance
of 2 m in front of the charging station, that would prevent the vacuum cleaner from
finding the charging station and docking successfully.
■ Insert the power adapter plug B2 into socket B6 of the charging station, and insert
the power cord plug into apower socket. Place the power cord in such away that it
does not tangle into the cleaning brushes of the vacuum cleaner.
■ In the event that the vacuum cleaner is not used for an extended period of time,
disconnect the charging station from the power socket and store it in adry, clean
and cool place.
CHARGING THE BATTERY FOR THE FIRST TIME
Note:
Prior to charging the battery, the vacuum cleaner must be turned on
using the main switch A4.
■ Before using the vacuum cleaner for the first time, it is necessary to fully charge the
battery for at least 5 hours.
■ Check that the charging station is correctly positioned and connected to apower
socket according to chapter Location of the charging station. Turn on the main
switch A4 of the vacuum cleaner, grasp the robotic vacuum cleaner and manually
place it into the charging station so that the charging contacts A9 on the underside
of the vacuum cleaner and the charging contacts B5 on the charging station are
connected. When the contacts are connected, the charging process will start.
■ The vacuum cleaner can also be charged without using the charging station. Insert
the plug B2 of the power adapter B1 into socket A5 of the vacuum cleaner, and
insert the power cord plug into apower socket.
■ During the charging process, the indicator light on button D1 will alternately flash
blue and red.
■ When the battery is fully charged, the indicator light of button D1 will remain
permanently lit blue and the process will end automatically. The vacuum cleaner
is now ready for use.
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SRV 9250 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info