Bedienungsanleitung Sencor SRV 9250 (Seite 11 von 11) (Englisch)

759461

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

- 11 - 07/2019

■ Wash both parts of the dust container under running water and dry it well.

Note:

The inside of the dust container does not need to be washed after every

use, it is sufficient to wipe it out with awet wiping cloth.

■ Tap out the dust filter and its holder or clean these parts using the brush F3. Check

the condition of the filter and if damaged, replace it with anew one. Insert the filter

back into the holder and into the dust container. Secure it in place by turning the

grip.

■ Insert the dust container back into the vacuum cleaner.

Attention:

Do not wash the dust container or the dust filter in adishwasher.

The dust filter must not be washed using water.

Before putting the vacuum cleaner back into operation, check

that the dust filter is in its location. Otherwise the vacuum

cleaner may be damaged.

MOP UNIT

■ After every dry or wet wiping, remove the mop fabric, wash it by hand in lukewarm

water with the addition of asmall amount of gentle washing powder and allow it

to dry naturally.

■ Slide the dust container E1 out of the water tank E2, open it and tip out any dirty

material. For hygiene reasons, we recommend doing this away from living areas.

Empty out the dust container after every use and clean it regularly.

■ Take the filter holder G1 and the dust filter G2 out of the dust container. Tap out the

dust filter and its holder or clean these parts using the brush. Check the condition

of the filter and if damaged, replace it with anew one. Insert the filter back into the

holder and into the dust container.

■ Wash the dust container under running water and dry it well.

■ Wipe the water tank using alightly dampened cloth and then wipe it dry. Take

special care to ensure that the contacts E6 are dry.

■ Return the closed dust container back into the water tank.

CENTRAL ROTARY BRUSH

■ Push on the latches H1 of the central rotary brush cover H2 and take the cover out

together with the brush.

■ Use adry wiping cloth to clean out the area in which the rotary brush is housed.

Clean out the suction hole as described in the previous paragraph.

■ Remove any dirt and material (dust, wound on hair, animal fur, etc.) from the rotary

brush and the bearings H4.

■ Reinsert the rotary brush and its cover.

SUCTION HOLE

■ The suction hole A20 is located underneath the central rotary brush A22, therefore,

take it out before cleaning the suction hole. With repeat use, dust and dirt may

accumulate around the suction hole, which may manifest itself through suction

decreased efficiency. Remove the dirt and dust from the suction hole using asoft

brush. Regularly clean the suction hole to ensure maximum suction power.

ROTARY BRUSHES

■ Take out the rotary brushes A12 and A16 by pulling them upwards. Remove any

dust and dirt from the location where the brushes were mounted.

■ Remove all dust and dirt from the brushes. If necessary you may wash the brushes

under running water. If the bristles were deformed while the vacuum cleaner was

running, dip them in warm water to allow them to return to their original shape.

Allow the brushes to dry before reattaching to the vacuum cleaner.

■ After cleaning them, reattach them.

Note:

The rotary brushes become worn out when used. After acertain time it

is necessary to replace the used brushes with new ones. To order new

brushes, please contact your vendor or an authorised service centre.

COMPLETE ROBOTIC VACUUM CLEANER

■ Regularly wipe the surface of the vacuum cleaner using asoft dry wiping cloth.

■ Clean the front swivel wheel, motorised wheels, suction hole, rotary brush and the

bottom sensors at least once per week or more frequently.

■ First remove any coarser dirt from the front swivel wheel and the motorised wheels.

Then clean them around their entire perimeter using alightly dampened cloth and

wipe them dry. Do not forget to also clean the area around the wheels.

■ Wipe the sensors on the underside of the vacuum cleaner using asoft dry wiping

cloth or cotton bud.

CHARGING STATION

■ At least once per week, clean the surface of the charging bast B4 including the

charging contacts B5 using asoft dry wiping cloth.

STORAGE

■ When not using the vacuum cleaner for an extended period of time, do the

following:

■ Clean the vacuum cleaner as described in chapter CLEANING AND MAINTENANCE.

■ Remove the battery from the vacuum cleaner as described in chapter INSERTING

AND REMOVING THE BATTERY.

■ Disconnect the charging station from the power socket.

■ Store the vacuum cleaner with all its accessories in adry, clean and cool place.

TECHNICAL SPECIFICATIONS

Robotic vacuum cleaner

Dimensions (diameter × height) .............................................................................. 335 × 79 mm

Weight ............................................................................................................................................... 2.5 kg

Operating time per single charge ........................................................................... up to 120 min

Operating time per single charge when mop is used ............................................90-110 min

Dust container capacity ........................................................................................................... 475 ml

Water tank capacity ........................................................................................................................ 0.2 l

Power adapter

Rated voltage range .................................................................................................... 100−240 VAC

Rated frequency....................................................................................................................... 50/60 Hz

Output ................................................................................................................................. 5 V, 1000 mA

Battery

Type ............................................................................................................................ 2,600 mAh Li-Ion

Charging time ................................................................................................................................... 4-6 h

Input ................................................................................................................................................. 5 V, 1 A

The declared noise emission level is lower than 65 dB(A), which represents alevel Aof

sound power with respect to areference sound power of 1 pW.

DISPOSAL OF USED BATTERIES

Prior to handing over the product at aspecialised collection facility, it is necessary to

ensure that the battery is removed. Prior to removing the battery, turn off the vacuum

cleaner using the main switch. Disconnect the battery using the reverse sequence to

that described in chapter INSERTING AND REMOVING THE BATTERY.

This symbol indicates that used batteries do not belong in ordinary

municipal waste. Hand over used batteries to designated collection

points for proper disposal. Correct disposal of batteries will help

prevent negative impacts on the environment and human health.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of

used batteries, request the necessary information about the correct

disposal method from the local authorities or from your vendor.

INSTRUCTIONS AND INFORMATION REGARDING THE

DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at asite designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used

electric or electronic products must not be added to ordinary

municipal waste. For proper disposal, renewal and recycling hand over

these appliances to determined collection points. Alternatively, in

some European Union states or other European countries you may

return your appliances to the local retailer when buying an equivalent

new appliance. Correct disposal of this product helps save valuable

natural resources and prevents potential negative effects on the

environment and human health, which could result from improper waste disposal. Ask

your local authorities or collection facility for more details. In accordance with national

regulations penalties may be imposed for the incorrect disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier

for the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product,

request the necessary information about the correct disposal method from the local

council or from your retailer.

This product meets all the basic requirements of EU directives related to

it.

SENCOR hereby declares that radio device model number SRV 9250BK is in compliance

with directive 2014/53/EU.

The full wording of the EU Declaration of Conformity is available at the website:

www.sencor.eu.

Sencor SRV 9250 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info