Bedienungsanleitung Sencor SSI 3520 (Seite 5 von 6) (Englisch)

759894

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

- 5 - 02/2021

EN Steam iron

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ Carefully unpack the appliance and take care not to throw away any part of

the packaging before you find all its parts. We recommend saving the original

cardboard box, packaging material, purchase receipt and responsibility statement

of the vendor or warranty card for at least the duration of the legal liability

for unsatisfactory performance or quality. In the event of transportation, we

recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Handle

A2 Steam impulse button

A3 Water spraying button

A4 Steam release regulator

– Steam release off

– Steam release on full

A5 Water tank cap

A6 Water spraying nozzle

A7 Ceramic ironing soleplate

A8 Maximum water level mark

A9 Heating indicator

A10 Swivel power cord end

Limits twisting and tangling of the

power cord.

A11 Stand

A12 Temperature control knob

A13 Transparent easy-to-fill water tank

A14 Self-Clean button for removing

limescale deposits

A15 Regulator setting mark

A16 Water tank filling container (not

shown)

BEFORE FIRST USE

■ Before first use, remove all packaging materials including promotion stickers and

labels from the iron. Wipe the soleplate with alightly dampened cloth before first

use and then wipe dry.

■ Using adry or lightly dampened cloth, also clean the outer parts of the iron and then

wipe it dry. Never submerge the iron in water or any other liquid!

OPERATION

FILLING THE WATER TANK

■ Before filling the water tank, the iron must be disconnected from the power socket

and the steam release regulator must be set to position (steam output off).

■ The iron is intended to be filled with tap water. Limescale deposits may quickly form,

if you live in an area with hard or very hard water. To extend the lifetime of the iron, it

is recommended to mix the tap water with distilled water. The ratio of distilled water

to tap water is as follows:

– 1:1 for medium hard water

– 2:1 for hard water

– 3:1 for very hard water

Note:

Your local water utility will provide information about the water hardness

in your area.

Attention:

Never add water softeners, vinegar, starch, descaling agents,

perfumes or other additives to the water.

■ Fill the included container with water. Flip open the cap of the filling opening and

slightly tilt the iron. Slowly pour the water from the container through the filling

opening into the water tank. Make sure that the water level does not rise above the

maximum water level mark on the water tank. To correctly assess the water level, it

is necessary to stand the iron in the upright position.

■ After filling the water tank, close the filling opening lid and put the iron in the

upright position. In the event that you spilled any water while filling, thoroughly

dry the iron.

SETTING TEMPERATURE ACCORDING TO TEXTILE

■ When setting the temperature, pay attention to the material composition of

the textile. It is recommended to sort the laundry according to the international

symbols shown on the textile, according to the type of textile or according to the

recommendations of the manufacturer on the label. The number of dots inside the

international symbol corresponds to the number of dots on the temperature control

knob.

INTERNATIONAL

SYMBOL FABRIC TYPE

SUITABLE FOR

CONTINUOUS

STEAMING

STEAM

BOOST SPRAYING

Synthetic fabric

(acrylic, acetate,

polyester,

viscose, etc.)

No No Yes

Cotton with

addition of

other types

of fibres, silk,

wool, wool with

addition of

other types of

fibres, etc.

No No Yes

Corduroy,

cotton, denim

and linen

Yes Yes No

Fabric, that should not be ironed

TURNING ON

■ Connect the power cord to apower socket. Turn the temperature control knob to

the required temperature setting. Indicator A9 will be lit, which means that the

iron is heating up. When the iron'sthermostat reaches the correct temperature, the

heating indicator will turn off. The iron is now ready for use.

Note:

The heating indicator will spontaneously turn on and off during use. This

is completely normal.

In the event that the temperature control knob was not set to the MIN

position the after previous use of the iron, and was left at one of the

temperatures, the heating indicator will be lit immediately when the

power cord is plugged into the power socket.

IRONING WITHOUT STEAMING

■ This function enables the use of the iron with or without water in the water tank,

however, the steam release regulator must be set to position (stream output off)

Note:

When used for the first time, the iron may emit smoke, which is non-toxic.

This is normal. After ashort time, the iron will stop emitting smoke.

IRONING WITH STEAM

Attention:

In order to iron with steam, the water tank must be filled with

water.

CONTINUOUS STEAMING FUNCTION

■ If you wish to iron with steam, slide the steam release regulator from position

(steam release off) towards position (steam release on). Select the position based

on the required steam intensity. The more the steam regulator is moved to the right,

the stronger the steam intensity.

■ Wait until the heating indicator turns off.

■ The steam release regulator can be moved at any time while ironing.

■ For all standard ironing, it is recommended to use the middle settings of the steam

release regulator. Only when ironing linen fabrics, strong silk or similar fabrics is it

recommended to set the steam release regulator to maximum.

Note:

The iron continuously emits steam only if you hold it in a horizontal

position. You can stop the release of steam by standing the iron upright.

■ Setting the steam release regulator to position (steam output off), deactivates

the steam function.

STEAM IMPULSE FUNCTION

■ Use this function when ironing with continuous steam is insufficient. Press the

steam impulse button to generate astrong flow of steam, which can straighten out

even very crumpled up textiles.

■ Wait at least 3 seconds before pressing the button again. If the heating indicator

starts flashing, wait until it turns off and only then press the button.

■ The steam impulse function can also be used when ironing hanging textiles (e.g.

curtains, garments hanging on coat hangers, etc.). Use one hand to gently tension

the fabric and vertically move the iron from bottom up. Press the steam impulse

button to achieve vertical bursts of steam. Do not hold the steam impulse button

continuously and do not consecutively use it more than 10 times.

Sencor SSI 3520 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info