Bedienungsanleitung Sencor STM 3624 (Seite 6 von 16) (Englisch)

758546

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

EN-6

Food Mixer

STM 3620WH, STM 3621GR, STM 3622BL, STM 3623OR, STM 3624RD

STM 3625VT, STM 3626YL, STM 3627TQ, STM 3628RS

2015

07/2015

PLANETARY MIXING SYSTEM

• The planetary mixing system is based on the principle of dual rotation of the attachment. The

attachment rotates anticlockwise along the inner perimeter of the bowl while rotating around

its own axis in the opposite direction. This ensures that ingredients inside the bowl are processed

thoroughly and evenly.

BEFORE FIRST USE

1. Take the appliance and its accessories out of the packaging materials.

2. Thoroughly wash all parts that are intended to come into contact with food (kneading hook A1,

whisk A2, beater A3, the stainless steel mixing bowl A4 and pouring shield A6 using warm

water and a neutral kitchen detergent. Then rinse them with clean water and dry thoroughly with

a ﬁne wiping cloth.

SELECTING ATTACHMENT TYPES

ATTACHMENT TYPE PURPOSE OF USE

Kneading hook A1It is used for kneading and preparing heavy and thick doughs containing

yeast, e.g. bread dough.

Beater A3It is used for mixing medium heavy and lighter doughs not containing yeast,

for mixing sauces, creams, ﬁllings, etc.

Whisk A2It is used for whisking whole eggs or egg whites, whipped cream, light

doughs, foamy creams, etc. Do not use it for mixing heavy and thick doughs.

ASSEMBLING AND DISASSEMBLING THE APPLIANCE

• Before you start assembling or disassembling the food mixer, check that it is turned off and

disconnected from the el. power socket.

1. Inserting the mixing bowl

1.1 Place the food mixer on an even, dry surface, for example on a kitchen workbench.

1.2 Release the arm A8 by pressing the PUSH button A9 and tilt it upwards. The arm A8 is locked in

the open position when the PUSH button A9 slides out together with an audible click.

1.3 Place the stainless steel bowl A4 into the hole in the base unit A5 and secure it in place by turning

it clockwise. When the bowl A4 is properly attached, it is not possible to lift it off the base unit

A5.

2. Attaching an attachment (kneading hook, beater or whisk)

2.1 If you decide to use the pouring shield A6, then it is necessary to attach it prior to mounting an

attachment. Carefully seat the pouring shield A6 on to the tilt-out arm and secure it in the locked

position by turning it anticlockwise.

2.2 When attaching an attachment, the arm A8 must be secured in the open position, see point 1.2

in chapter Inserting the mixing bowl. Attach one of the attachments to the T-shaped shaft of

the mixing head A7 so that the shaft ﬁts into the hole on the attachment. Push the attachment

towards the mixing head A7 turn it anticlockwise to secure it to the shaft.

2.3 With one hand, hold the attachment and gently pull it downwards. If it is properly secured to the

shaft, it will not come off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor STM 3624 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info