04/2017
- 7 -
Copyright © 2017, F
EN F
User'smanual
Prior to using this appliance, please r manual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’smanual
retrieved for future use
We rec
purchase receipt and responsibility statement of the v
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we rec
appliance in the original box from the manufacturer
DESCRIPTION OF
A1 Kneading hook
A2 Balloon whisk
A3 A-shaped beater
A4 5.5-litre stainless steel bowl
A5 Base unit
A6 Removable cover of the front mea
grinder attachment hub
A7 Removable cover of the top
blender attachment hub
A8 Tilt-out multi-function head
A9 Bowl cover with ahole for adding
ingredients
A10 Hub for attaching attachments
A1– A3
A11 Multi-function head release lock
A12 Speed control knob
serves to set speeds 1 to 10, sets
the pulse level and turns off the
appliance.
A13 Suction cups
provide stability to the appliance
during operation.
DESCRIPTION OF MEA
B1 Pusher
B2 Hopper
B3 Feed tube
B4 Grinding chamber
B5 Screw shaft
B6 Grinding blade
B7 Screw ring
B8 Fine grinding plate
B9 Coarse grinding plate
B10 Separator
B11 Thin sausage stuffer attachment
B12 Thick sausage stuffer attachment
DESCRIPTION OF
C1 Inner cap of the blending jar
C2 Outer lid of the blending jar with
ahole for adding ingredients
C3 Glass blending jar with 1.5
capacity
C4 Handle
C5 Blade assembly
is an integral part of the blending
jar
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all accessory parts that are intended to come into contact
with food using warm water and aneutral kitchen detergent.
under clean running water and thoroughly wipe dry with afine wiping cloth or
allow them to dry naturally. After washing and drying, we r
the grinding blade B6 and the grinding plates B8 andB9 with cooking oil.
3. Do not submerge the food processor or its power cord in water or an
liquids.
Attention:
The metal parts of the meat grinder and attachments A1 –A3 are not
intended for washing in a dishwasher. Other remov
washed in adishwasher
BEA
SELECTING
Attachment type Purpose of use
Beater A3 It is used for beating light and medium heavy yeast-free
doughs, for preparing saucesDo not
use it for kneading heavy doughs.
Balloon whisk A2 It is used for whisking whole eggs or egg whites, whipped
cream, foamy crDo not use it for beating or
kneading doughs.
Kneading hook A1 It is used for kneading various types of doughs including
heavy and thick doughs such as for example bread dough,
pizza dough, fresh pastry doughs, etc.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
Before you start assembling or disassembling the food processor
is turned off and disconnected from the power socket.
1. Inserting the bowl
1.1 Place the food processor on an ev
countertop.
1.2 Use the lock A11 to release the multi-function head A8 and tilt it out all the
wayA8 in the open position is
indicated by the lock A11 returning to the default position.
1.3 Insert the stainless steel bowl A4 into the base unit A5 and secure it in place
by turning it clockwise. When the boA4 is properly attached, it cannot be
separately lifted out of the base unit A5 .
2. Mounting attachments and the cov
2.1 When attaching an attachment, the multi-function head A8 must be locked
in the open position, see point 1.2 in the previous chapter
attachments on to the shaft on the underside of the multi-function head A8
so that the shaft fits into the hole on the attachment. Push the attachment
towards the multi-function head A8 and turn it anticlockwise to secure it in
place. Lightly pull the attachment down
properly attached.
2.2 Place the ingredients that yA4 . Release the lock
A11 and tilt the multi-function head A8 to the horizontal position. After tilting
down the multi-function head A8 , release the lock A11 .
multi-function head A8 in the tilted down work position is indicated by the lock
A11 returning to the default position.
2.3 Place the cover A9 on to the bowl A4 .
3. Disassembly
3.1 Remove the coA9 . Release the lock A11 and tilt out the multi-function head
A8 all the wayA8 , release the lock A11 .
Locking of the multi-function head A8 in
by the lock A11 returning to the default position, which is accompanied by an
audible click.
3.2 Push the attachment gently towards the multi-function head 8 .
clockwise until it is released from the shaft and take it off. A4
anticlockwise and remove it from the base unit A5 . Move the arm A8 back to
the horizontal position.
USING THE FOOD PROCESSOR
1. Select the right t
the appliance according to the instructions in the chapter Assembling and
disassembling the food processorA4 before
tilting the multi-function head A8 to the horizontal position.
Attention:
In a
dough or 0.8 litres of thick, heavy dough. The maximum number of egg
whites that can be whisked at once is 12.
If an insufficient amount of ingredients are put in the bowl A4 (less than
0.3 litres of dough), then they may not be per
2. Make sure that the speed control knob A12 is set to position 0 (off
multi-function head A8 is tilted down in the horizontal position. A7
must be properly attached to the multi-function head A8 . Otherwise, the food
processor will not start. Connect the power cord to apow
3. Set the required speed using the speed contrA12 . Gradually turn the
speed control knob A12 clockwise to increase the speed, turning it in the
opposite direction will reduce the speed.
set a
ensures that the set speed will be maintained under various loads.
running, ingredients may be added inA4 through the hole in the
cover A9 .
4. The pulse mode is used for increasing the speed to maximum for ashort time.
TA12 to the ”P”
and to ensure continuous operation hold it down in this position. A
you release the speed control knob A12 , it will automatically return t
0 (off
5. If it is necessary to wipe ingredients off the inside of the mixing bowl A4 and
the attachment, first turn off the food processor b
knob A12 to position 0 (off
Wait until the r stop and only then scrape a
ingredients with aspatula.
6. After you haA12 to
position 0 (off
7. Wait until the r st
processor according to the instructions included in chapter Assembling and
disassembling the food processor
contents of the bowl A4 .
8. Clean out the food processor after each use according t
chapter Cleaning and maintenance.
