Bedienungsanleitung Sencor STM 3776 (Seite 3 von 9) (Englisch)

758530

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

04/2017

- 3 -

■Make sure that no hair, clothing or other items enter the feed tube of meat grinder

while it is running. Do not put anything other than the ingredients that are to be

processed into the feed tube.

■Never use your fingers or other items to push ingredients through the meat grinder

feed tube. For this purpose there is apusher included as an accessory.

Warning:

Incorrect use may lead to injuries.

■To prevent injury caused by sharp edges, be especially careful when handling

the grinding blade of the meat grinder and the blade assembly of the blender.

Increased attention must also be paid when emptying out the blending jar, when

removing the grinding blade from the chamber, and when cleaning the appliance.

■Do not attempt to grind bones, frozen meat or other hard ingredients.

■Hot liquids up to atemperature of 80 °C may be processed in the blending jar. Be

especially careful when handling hot liquids. Hot steam or splashing hot foods and

liquids may cause scalding. Never start the blender without the lid properly seated

in position. When processing hot liquids, do not remove the inner cap during

operation. Do not touch the hot surface. Use the handle to carry the blending jar

when it is hot.

■The maximum continuous operating time is 10 minutes. Do not exceed the

maximum operating time of 5 minutes when in the kneading mode and do not

exceed the maximum operating time of 3 minutes when using the blender. Before

starting it again, allow the appliance to cool down for 30 minutes.

■Always turn off the appliance, disconnect it from the power socket when

not be using it, when leaving it without supervision, and before assembling,

disassembling, cleaning or moving it. Prior to disassembling the appliance and

replacing accessories or accessible parts that move during use, wait until all

moving parts come to astop.

■Clean it according to the instructions in chapter Cleaning and maintenance.

■Never wash the appliance under running water or submerge it in water or another

liquid.

■Do not turn on the appliance when it is empty. Incorrect use of the appliance may

negatively affect its lifetime.

■Ensure that the power plug contacts do not come into contact with water or

moisture. Do not place heavy items on the power cord. Make sure that the power

cord does not hang over the edge of atable or that it is not touching ahot surface.

■Disconnect the power cord from the power socket by pulling on the plug, never

pulling on the cord. Otherwise, this could damage the power cord or the socket.

■If the power cord is damaged, have it replaced at aprofessional service centre. It is

forbidden to use the appliance if it has adamaged power cord.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor STM 3776 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor STM 3776

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info