Bedienungsanleitung Sencor STM 46 (Seite 4 von 22) (Englisch)

758521

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

EN-4

Food Processor

STM 40WH / STM 41GR / STM 42BL / STM 43OR

STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS

2014

11/2014

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND STORE FOR FUTURE USE.

• Before connecting this appliance to a power socket, make sure the voltage stated on the

product's rating label corresponds to the voltage in your power socket.

• Never use accessories, which have not been supplied with this appliance or which have not been

explicitly recommended by the manufacturer.

• The appliance is intended and designed for processing a standard amount of food in the household.

• Do not use the appliance for anything other than its intended purpose.

• Do not use the appliance in an industrial environment or outdoors.

• Do not place the appliance on window sills or on unstable surfaces. Only place the appliance on an

even, dry and stable surface.

• Do not place the appliance on an electric or gas stove, in the vicinity of an open ﬂ ame or appliances

that are sources of heat.

• Ensure that the power plug contacts do not come into contact with water or moisture.

• Never use multiple attachments simultaneously.

• Do not wash the appliance (except for the removable parts) under running water and do not

submerge it in water or any other liquid.

• Always turn off the appliance, disconnect it from the power socket if you will not be using it, if you

will be leaving it without supervision, and before assembling, disassembling, cleaning or moving it.

Prior to disassembling the appliance and replacing accessories or accessible parts that move during

use, wait until all moving parts come to a stop.

• For safety reasons, this appliance is equipped with a safety mechanism that prevents the motor

from being started if the appliance's arm is tilted out.

• Before putting the appliance into operation, check that it is correctly assembled and that the arm

is in the horizontal position.

• Allow hot liquids or food to cool down before mixing them.

• Do not attempt to grind bones, nut shells or other hard ingredients.

• Do not leave the appliance in continuous operation under a heavy load for a period longer than

10 minutes. Before turning it on again, allow it to cool down for at least 30 minutes.

• Do not tilt out the arm or put your hands or items, such as a kitchen knife, fork or wooden spoon,

into the bowl while the appliance is running. Do not touch rotating parts of the appliance or

attachments and ensure that foreign items such as clothing, hair, etc. are kept away. An injury could

occur or the appliance could be damaged.

• If an item, such as a spoon, falls into the mixing bowl while the appliance is running, immediately

set the speed control knob to the OFF position (stand-by mode), disconnect the power cord from

the power socket and take the item out of the bowl.

• If ingredients stick to the attachments or the inside of the bowl, turn off the appliance and

disconnect it from the power socket. Use a spatula to clean the attachments and the inside of the

bowl. Then you can continue mixing.

• Never use your ﬁ ngers or other items to push ingredients through the feed tube of the meat

grinder or the slicing and grating attachment. For this purpose there is a pusher included as an

accessory to this appliance.

• The appliance must not run without a load. The incorrect use of the appliance may negatively

affect its lifetime.

• Before storing the appliance, check that the stand arm is tilted to the horizontal position.

• Do not place heavy items on the power cord. Make sure the power cord does not hang over the

edge of a table or that it does not touch a hot surface.

• Do not disconnect the appliance from the power socket by pulling on the power cord. This could

damage the power cord or the power socket. Disconnect the cord from the power socket by gently

pulling the plug of the power cord.

• If the power cord is damaged, have it replaced at a specialised service centre. It is forbidden to use

the appliance if it has a damaged power cord or plug.

• To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any

adjustments to it. Have all repairs or adjustments of the appliance performed at an authorised

service centre. By tampering with the appliance you risk voiding your legal rights arising from

unsatisfactory performance or quality warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor STM 46 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info