Bedienungsanleitung Sencor STM 46 (Seite 8 von 22) (Englisch)

758521

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

EN-8

Food Processor

STM 40WH / STM 41GR / STM 42BL / STM 43OR

STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS

2014

11/2014

BLENDING, WHIPPING AND KNEADING

PLANETARY MIXING SYSTEM

• The planetary mixing system is based on the principle of dual rotation of the attachment. The

attachment rotates anticlockwise along the inner perimeter of the bowl while rotating around

its own axis in the opposite direction. This ensures that ingredients are processed thoroughly and

evenly.

SELECTING ATTACHMENT TYPES

ATTACHMENT TYPE APPLICATION

Kneading hook A1It is used for kneading and preparing heavy and thick doughs containing

yeast, e.g. bread dough.

Beater A3It is used for mixing medium heavy and lighter doughs not containing yeast,

for mixing sauces, creams, ﬁ llings, etc.

Whisk A2It is used for whisking whole eggs or egg whites, whipped cream, light

doughs, foamy creams, etc. Do not use it for mixing heavy and thick doughs.

ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR

• Before you start assembling or disassembling the food processor, check that it is turned off and

disconnected from the el. power socket.

1. Inserting the mixing bowl

1.1 Place the food processor on an even, dry surface, for example on a kitchen countertop.

1.2 Slide button A0 upwards and hold it there. Tilt out the arm A8. To lock the arm A8 in the open

position, release button A0.

1.3 Place the stainless steel bowl A4 into the hole in the base unit A5 and secure it in place by turning

it clockwise. When the bowl A4 is properly attached, it is not possible to lift it off the base unit

A5.

2. Attaching an attachment (kneading hook, beater or whisk)

2.1 When attaching an attachment, the arm A8 must be secured in the open position, see point 1.2

in chapter Inserting the mixing bowl. Attach one of the attachments on to the shaft of the mixing

head A9 so that the shaft A9 ﬁ ts into the hole on the attachment. Push the attachment towards

the mixing head A8 and turn it anticlockwise to secure it to the shaft A9.

2.2 With one hand, hold the attachment and gently pull it downwards. If it is properly secured to the

shaft A9, it will not come off.

2.3 If you will not be immediately placing ingredients into the mixing bowl A4, slide the button A0

upwards, hold it down and tilt the arm A8 to the horizontal position. After tilting the arm A8 to

the horizontal position, release the button A0.

3. Removing the attachments and mixing bowl

3.1 Slide button A0 upwards and hold it there. Tilt out the arm A8. To lock the arm A8 in the open

position, release button A0.

3.2 Hold the attachment and gently push it against the mixing head A8. Then rotate it clockwise until

it is released from the shaft A9 and take it off. Turn the mixing bowl A4 anticlockwise and take

it off the base unit A5. Move the arm A8 back to the horizontal position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor STM 46 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info