Bedienungsanleitung Sencor STM 47 (Seite 13 von 22) (Englisch)

758522

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Food Processor

STM 40WH / STM 41GR / STM 42BL / STM 43OR

STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS

EN-13

2014

11/2014

tube that is then cut into smaller pieces. The kebab is a traditional meal from the Middle East made

predominantly from ground meat and whole grain wheat.

Attention:

Do not use ﬁ ngers or other utensils to push the ground meat mixture through the feed tube B3.

Always use the pusher B1 designed for this purpose.

3. To turn off the appliance, set the speed control knob Aqa to the OFF position.

4. Clean out the individual parts of the attachment after each use according to the instructions in

chapter Cleaning and maintenance.

GRATING AND SLICING

ASSEMBLING AND DISASSEMBLING THE GRATING AND SLICING ATTACHMENT

1. The attachment is assembled by inserting one of the graters C4, C5 or C6 into the chamber C3.

2. Check that the appliance is turned off and disconnected from the el. power socket. The arm A8

must be tilted down to a horizontal position and the attachment A1, A2 or A3 must be removed.

Remove the cover A7 from the multi-function head and push the assembled attachment at an

angle of 45° against the attachment hub that is located on the front part of the multi-function

head and secure it in place by turning it anticlockwise (ﬁ g. D). The attachment is secured in the

vertical position when the push button A6 slides out together with an audible click.

3. Now the attachment is ready for operation.

4. To disassemble, press the button A6 (see ﬁ g. E) and remove the attachment by turning it clockwise.

When disassembling the attachment into its individual parts, proceed in the reverse sequence.

USING THE GRATING AND SLICING ATTACHMENT

1. The attachment is designed for grating or slicing fruit and vegetables (e.g. potatoes, beetroot,

cabbage, carrot, cucumber, apples, etc.) and for making breadcrumbs.

2. Prepare the ingredients and cut them into pieces that will pass through the feed tube C2. Remove

kernels and stones from the fruit and vegetables.

Attention:

Do not process frozen food. Under no circumstances should you attempt to process hard stones

that are found for example in mango or avocado.

3. Make sure that the appliance is correctly assembled and that the speed control knob Aqa is set to

the OFF position. Insert the power plug into an electrical power socket.

4. Place the stainless steel bowl A4 or another suitable container under the attachment. Use the

speed control knob Aqa to set the desired speed. We recommend to initially set the lowest speed

and then increase it as required.

5. Gradually add the ingredients into the feed tube C2 and push through using the pusher C1.

Attention:

Do not use ﬁ ngers or other utensils to push ingredients through the feed tube C2. Always use

the pusher C1 designed for this purpose.

6. To turn off the appliance, set the speed control knob Aqa to the OFF position.

7. Clean out the individual parts of the attachment after each use according to the instructions in

chapter Cleaning and maintenance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor STM 47 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info