- 9 - 04/2021
Copyright © 2021, F
Attention:
Do not use ngers or other items to push the ground meat in.
Always use the pusher B1 designed for this purpose
3. TA12 to the OFF position.
4. Clean out the individual parts of the attachment after each use according to the instructions
in chapter Cleaning and maintenance.
ASSEMBLING AND DISASSEMBLING THE C
1. Proceed in the same way as when assembling the meat grinder
instead of the grinding blade B6 and the grinding plate B8 , B9 or B10 only parB11 ,B15
and B16 are used.
2. Place the separator B11 on to the scrB4
ts into the groove in the separB11 . Insert the cookB16 into the screw
ring B7 . Screw the screw ring B7 clockwise on to the grinding chamber B4 . Complete the
assembly by inserting the cookie maker B15 into the holder B16 and attaching the hopper
B2 to the feed tube B3.
3. Attach the attachment to the food proc
chapter Assembling and disassembling the meat grinder
4. When disassembling, rst remove the hopper B2 . A1 and remov
attachment by turning it clockwise. After removing the attachment, put the coA2 back
in its place.
5. When disassembling the attachment into its individual par
sequence.
USING THE C
1. Place the prepared dough on to the hopper B2 . Slide the cookie maker B15 to the left or
right to set the desired cookie shape.
2. Insert the power plug into a
knob A12 . When starting it for the rst time, we recommend that y
increase or decrease it as required
3. Use the pusher B1 to push the dough through the feed tube B3 .
push the dough out in the required shape that you set using the cookie maker B15 .
We recommend that y
cut the formed dough into smaller pieces.
Attention:
Do not use ngers or other items to push the dough in. Always
use the pusher B1 .
4. When you have nished using the food processor
knob A12 to the OFF position.
5. Clean out the attachment after each use according to the instructions in chapter Cleaning
and maintenance.
BLENDING
ASSEMBLING AND DISASSEMBLING THE BLENDER
1. On to the blending jar C4 , place the outer lid C2 so that its edges copy the neck of the jar
and push it down thoroughly along its entire perimeterC2 , place the
inner cap C1 and push it down all the way
2. Make sure that the food pr
The multi-function head A7 must be tilted down in the horizontal position and the whisk,
beater or kneading attachments must be removed. Release and remo
hub cover A6 . Place the assembled blending jar on to the top hub and pulling it gen
turn it in the direction of the symbol all the wa
blender from starting unless it is correctly secured to the multi-function head A7 .
3. T
USING THE BLENDER
1. The blender is intended for preparing meals and drinks such as milkshakes, cr
sauces, spreads, fr
preparing potato purée, y
2. Assemble the blender according t
disassembling the blender
advance) into the blending jar C4 .
Note:
The maximum capacity of the blending jar C4 is 1.5 litres. Never ll it past
the maximum mark. When processing hot liquids or liquids that expand in
volume during the blending process, it is rec
jar to no more than ⅔ of its maximum capacity.
3. Make sure that the food processor is correctly assembled and that the speed contr
A12 is set to the OFF position. Connect the power cord to apower socket. Set the requir
speed using the speed control knob A12 . W
allow the ingredients to mix together
is appropriate when you wish to blend food only v
the speed control knob A12 to the PULSE position and hold it in this position for amoment.
As soon as you release the speed control knob A12 , it will automatically r
position.
Attention:
Hot liquids up to a temperature of 55 °C may be processed in
the blending jar
2 minutes. Do not leave the appliance in con
for longer than indicated above
30 minutes.
4. While blending, you may add food or liquids to the blending jar C4 through the hole in the
lid C2 after removing the inner cap C1 . Never open the outer lid C2 during operation.
processing hot liquids, the inner cap C1 must remain closed
5. In the event that food is sticking to the blade assembly C6 or the walls of the blending jar
C4, turn the appliance o by turning the speed control knob A12 to the OFF position and
disconnect it from the power socket. Make sure that the blade assembly C6 has stopped
rotating. Carefully rA7 by
turning it in the direction of the symbol . T plastic spatula,
clean the blade assembly C6 and the inside of the blending jar C4 . Put the lid back on and
reattach the blender assembly to the multi-function head A7 . Plug the power cord in
apower socket and continue blending.
6. After you have nished using the applianceA12 to the OFF
position and disconnect the power cord from the pow
assembly C6 has stopped r
function head A7 . Put the cover A6 back in its place and use asoft plastic spatula to r
food from the blending jar C4 .
7. Disassemble the assembled bowl and clean the individual parts after each use according to
the instructions in chapter Cleaning and maintenance.
ADVICE AND TIPS FOR BLENDING
■ First cut food with a rm consistency such as fruit and vegetables into smaller pieces
measuring 3 cm and only then blend it.
■ First, blend a smaller amount of ingr
through the hole in the lid C2 while blending. In this way
than by adding all ingredients into the blending jar C4 at onc
■ If you need to blend food of asolid consistency together with liquids, we recommend that
you rst blend the food of solid consistency and apart of the liquids.
remaining liquids through the hole in the lid C2 while blending.
■ T
C6 does not get jammed too often. Start the blender repeatedly in short intervals.
■ Ice cubes must be processed immediately upon being r
ice starts to melt, the ice cubes will stick together and it will not be possible to blend them.
QUICK GUIDE T
Ingredients Speed selection Recommended
blending time
Fruit, vegetables cut int 5–6 30 s
Baby food 5–6 40 s
Spreads, dressings, marinades 3–4 30 s
Smoothies and cocktails 6 to MAX 40 s
Soups 6 to MAX 30 s
Ice cubes PULSE
Note:
The above food pr
time depends on the size of the ingredients, their amount and the r
nal consistency.
GRA
PURPOSE OF THE GRA
The attachment is designed for slicing and gr
nuts, for making breadcrumbs, etc.
The table Choosing the right type of grating cone will help you to select the right type.
ASSEMBLING AND DISASSEMBLING THE GRA
1. Select one of the grating cones B5 –B9 and insert it into the chamber B3 , so that the shaft
inside the chamber B3 slides into the pentagonal hole in the centre of the g
Seat the locking pin B4 on to the shaft, and then turn it to secure the grating cone inside
the chamber B3 . Attach the chute B10 to the chamber B3 .
2. Make sure that the food proc
The arm of the food processor must be tilted down in the horiz
blender
from the multi-function head of the food processor
at an angle of 45° against the front attachment hub and secure it in place b
anticlockwise, see figure D
3. The attachmen
the left of the front attachment hub slides out. An audible click is made when the button
slides out. TB1 is inserted in the feed tube
B2. T
4.
attachment hub, and then remo
disassembling the attachment into its individual parts, proceed in the reverse sequenc
USING THE GRA
1. Prepare the ingrB2 .
Remove hard kernels or stones from the fruit and vegetables
