■Prior to using this appliance, please read the user´smanual thoroughly, even in cases, when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user´smanual. Keep this user´smanual in asafe place where it can be easily retrieved for future reference.
■We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or warranty card for at least the duration of
the legal liability of unsatisfactory performance or quality. In the event of transportation, we recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Control lever
A2 Electronic control knob of toasting intensity
A3 Defrost button for toasting frozen bread products
A4 Reheat button for reheating bread products
A5 Cancel button for immediate process cancelling
A6 Removable crumb tray
A7 Toast slots
BEFORE FIRST USE
Before first use take the appliance and its accessories out of the packaging material and remove all promotional labels and stickers from it.
Before first use, to remove any potential odours, the toaster must be started empty at least three times with the maximum toasting intensity set.
OPERATING THE APPLIANCE
Place the toaster on an even, dry and stable surface at asufficient distance from surfaces of flammable materials as described in chapter Safety instructions.
Fully unwind the power cord and connect the toaster to apower socket.
Ensure the removable crumb tray is correctly installed.
Insert one piece of sandwich bread, slice of standard bread, half abun or bagel, etc. into each slot A7. The bread slices must not be too thick so as not to jam in the slots A7 and
must not extend out of the toaster when the control lever A1 is locked in the lower position.
Attention:
Do not place bread products that have butter, margarine, etc. spread on them in the toaster.
Use the electronic control knob A2 to set the toasting intensity in the range from 1 to 7 where the setting 1 means the lightest toasting intensity and the setting 7 means the darkest
toasting intensity. Upon first use, it is recommended to set the toasting intensity to level 4. You can then choose adifferent toasting intensity level depending on your preferences.
Start the toaster by pushing down the control lever A1. The toasting process will automatically start when the control lever A1 is locked in the lower position. The cancel button
A5 will be lit.
Note:
Unless the toaster is connected to apower socket, the control lever A1 will not lock in the lower position, and the toaster will not start..
The toaster will turn off automatically and raise the inserted bread product as soon as the toasting process is completed. Remove the toasts from the toaster and repeat the above
described procedure.
Attention:
Never attempt to take out ajammed piece of bread or any other bread product using aknife or another metal object. This could lead to injury by electrical
shock or damage the appliance. If bread products become jammed inside the toaster, turn it off, disconnect it from the power socket and allow it to cool
down. Then carefully remove the bread products.
After using the toaster, disconnect it from the power socket and allow it to cool down.
Reheat toast function
This function makes it possible to heat up atoast without further toasting.
Insert toasts in the slots A7 and push the control lever A2 down until it is locked in the lower position. Press the Reheat button A4. The button A4 will be lit.
The toaster will automatically raise the inserted bread products at the end the toast heating process. Remove the toasts from the toaster and repeat the above described procedure to
reheat another bread products.
Note:
The reheat time is pre-set from the factory and it cannot be adjusted. The reheating process can be interrupted at any time by pressing the Cancel button A5.
Defrost function
Insert frozen bread products into the slots A7 and push the control lever A2 down until it is locked in the lower position. Press the Defrost button A3. Button A3 will be lit.
The toaster will automatically raise the inserted bread products at the end the toast heating process. Remove the toasts from the toaster and repeat the above described procedure
to defrost another frozen bread products.
Note:
The defrosting process can be interrupted at any time by pressing the Cancel button A5.
Attention:
The reheat function and defrost function cannot be set simultaneously.
Tips and advice for setting toasting intensity
■The toasting process occurs in two phases. In the first phase, moisture is evaporated from the bread product followed by toasting in the second phase.
■The toasting level depends on the type, size and freshness of the bread product.
■Fresh bread will toast for longer because first the moisture contained in it needs to be evaporated and only then can actual toasting begin. Therefore, it requires ahigher toasting
intensity to be set. Wholegrain bread, thicker bread slices, halved buns and bagels, likewise require ahigher toasting intensity to be set.
■Older bread that does not contain as much moisture as fresh bread will toast for ashorter period and will, therefore, require alower toasting intensity than usual.
■Smaller athinner bread slices will toast faster than larger and thicker bread slices.
■When toasting only asingle bread slice, set alower toasting intensity level than when toasting two bread slices at the same time.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Sencor STS 2606 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
