Bedienungsanleitung Sencor STS 5050 (Seite 5 von 6) (Englisch)

758950

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

05/2017

- 5 -

EN Toaster

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly,

even in cases, when one has already familiarised themselves with

previous use of similar types of appliances. Only use the appliance in the

manner described in this user’smanual. Keep this user’smanual in asafe

place where it can be easily retrieved for future reference.

■ We recommend saving the original cardboard box, packaging material,

purchase receipt and responsibility statement of the vendor or warranty

card for at least the duration of the legal liability for unsatisfactory

performance or quality. In the event of transportation, we recommend

that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Removable toasting rack

A2 Two toast slots

A3 LED operation indicator

A4 Electronic timer

for 9 levels of toasting intensity

A5 LED display

A6 Removable crumb tray

A7 “Reheat” button

A8 “Cancel” button

A9 “Defrost” button

A10 Control lever with the “High

Lift” function for easy removal

of smaller bread products

A11 Power cord storage

compartment

A12 Anti-slip feet

BEFORE FIRST USE

■ Before rst use take the appliance and its accessories out of the

packaging material and remove all promotional labels and stickers from

it.

■ Wash the toasting rack A1 using warm water and a neutral kitchen

detergent. Then rinse it under running water and dry it thoroughly with

awiping cloth.

Attention:

Make sure that the toasting rack A1 is completely dry before

placing it on the toaster.

■ Before rst use, to remove any potential odours, the toaster must be

started empty at least three times with the maximum toasting intensity

set.

OPERATING THE APPLIANCE

■ Place the toaster on an even, dry and stable surface at a sucient

distance from surfaces of ammable materials as described in chapter

Safety instructions.

■ Fully unwind the power cord and connect the toaster to apower socket.

When not using the toasting rack A1, remove it. Insert one piece of

sandwich bread, slice of standard bread, half a bun or bagel, etc. into

each slot A2. The bread slices must not be too thick so as not to jam in

the slots A2 and must not extend out of the toaster when the control

lever A10 is locked in the lower position.

Attention:

Do not place bread products that have butter, margarine, etc.

spread on them into the toaster.

■ Use the electronic timer A4 to set the toasting intensity in the range from

1 to 9. Low toasting intensity corresponds to levels 1 and 3. For medium

toasting intensity, set level 4 to 6, and for high toasting intensity, set level

7 to 9. Upon rst use, it is recommended to set the toasting intensity

to level 4 or 5. To toast another bread product, you can then choose

adierent toasting intensity level depending on the type of bread and

your taste preference.

■ Start the toaster by pushing down the control lever A10. The toasting

process will automatically start when the control lever A10 is locked in

the lower position. Button A8 will be lit, the LED operating indicators A3

will be lit, and the set toasting intensity level will appear on the display

A5. The LED indicators A3 will gradually turn o during operation.

Note:

Unless the toaster is connected to a power socket, the control

lever A10 will not lock in the lower position, and the toaster will

not start.

The toasting process can be stopped at any time during operation

by pressing button A8.

■ The toaster will turn o automatically and raise the inserted bread

product as soon as the toasting process is complete. The display A5,

LED indicators A3 and the backlight of button A8 will turn o. To toast

more bread products, remove the toasts from the toaster and repeat the

above described procedure.

Note:

The control lever A10 is equipped with a “High Lift” function that

lifts the bread product all the way up. This makes it easier to take

out smaller bread products.

Attention:

Never attempt to take out ajammed piece of bread or any other

bread product using a knife or another metal object. This could

lead to injury by electrical shock or damage the appliance. If bread

products become jammed inside the toaster, turn it o, disconnect

it from the power socket and allow it to cool down. Then carefully

remove the bread products.

■ After using the toaster, disconnect it from the power socket and allow it

to cool down.

Reheat toast function

■ This function makes it possible to heat up a toast without further

toasting. The setting on the timer A4 has no eect on this function.

■ Insert toasts into the slots A2 and push the control lever A10 down until

it is locked in the lower position. Button A8 will be lit, the LED operating

indicators A3 will be lit, and the set toasting intensity level will appear

on the display A5. To heat up atoast, press button A7. Button A7 will be

lit and the toast reheat mode will be started. The LED indicators A3 will

gradually turn o during operation.

■ The toaster will automatically raise the inserted bread products at the

end of the toast heating process. The display A5, LED indicators A3 and

the button backlights will turn o.

Note:

The toast reheating process can be interrupted at any time by

pressing button A8.

Toast frozen bread products function

■ Insert frozen bread products into the slots A2 and set the desired

toasting level. Push the control lever A10 down until it becomes locked

in the lower position. Button A8 will be lit, the LED operating indicators

A3 will be lit, and the set toasting intensity level will appear on the

display A5.

■ To toast frozen bread products, press button A9. Button A9 will be lit and

the toast frozen bread products mode will be started. In the rst phase,

the frozen bread products are defrosted, in the second phase they are

toasted. The LED indicators A3 will gradually turn o during operation.

■ The toaster will automatically raise the inserted bread products at the

end of the toasting process. The display A5, LED indicators A3 and the

button backlights will turn o.

Note:

The toast frozen bread products process can be interrupted at any

time by pressing button A8.

Note:

The reheat toast function and the toast frozen bread products

function cannot be set simultaneously.

Toasting rack

■ Place the rack A1 on to the toaster as shown in gure Aand place the

bread product (small baguette, bread roll or bun) that you wish to toast

on to it. Set alow toasting intensity in the range from 1 to 3 and push the

control lever A10 down until it locks in the lower position. The toasting

process will start automatically. Button A8 will be lit, the LED operating

indicators A3 will be lit, and the set toasting intensity level will appear

on the display A5. The LED indicators A3 will gradually turn o during

operation.

Sencor STS 5050 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor STS 5050

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info