758951
5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
06/2017
- 5 -
Copyright © 2017, Fast ČR, a.s.
EN Toaster
User'smanual
Prior to using this appliance, please read the user’smanual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in the
manner described in this user’smanual. Keep this user’smanual in asafe
place where it can be easily retrieved for future reference.
■ We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty
card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Removable toasting rack
A2 Pair of toasting slots
A3 LED operation indicator
A4 Electronic timer
for 9 levels of toasting intensity
A5 LED display
A6 Removable crumb tray
There are two trays on the
underside of the appliance.
Each separate for one pair of
toasting slots.
A7 “Reheat” button
A8 “Cancel” button
A9 “Defrost” button
A10 Control lever with the “High
Lift” function for easy removal
of smaller bread products
A11 Anti-slip feet
A12 Power cord storage
compartment
BEFORE FIRST USE
■ Before rst use take the appliance and its accessories out of the
packaging material and remove all promotional labels and stickers from
it.
■ Wash the toasting rack A1 using warm water and a neutral kitchen
detergent. Then rinse it under running water and dry it thoroughly with
awiping cloth.
Attention:
Make sure that the toasting rack A1 is completely dry before
placing it on the toaster.
■ Before rst use, to remove any potential odours, the toaster must be
started empty at least three times with the maximum toasting intensity
set.
OPERATING THE APPLIANCE
■ Place the toaster on an even, dry and stable surface at a sucient
distance from surfaces of ammable materials as described in chapter
Safety instructions.
■ Fully unwind the power cord and connect the toaster to apower socket.
When not using the toasting rack A1, remove it. Only one slice of toast
bread, one slice of ordinary bread, half a bun or bagel, etc. may be
inserted into each slot A2. The bread slices must not be too thick so as
not to jam in the slots A2 and must not extend out of the toaster when
the control lever A10 is locked in the lower position.
Attention:
Do not place bread products that have butter, margarine, etc.
spread on them into the toaster.
■ Use the electronic timer A4 to set the toasting intensity in the range from
1 to 9. Low toasting intensity corresponds to levels 1 and 3. For medium
toasting intensity, set level 4 to 6, and for high toasting intensity, set level
7 to 9. Upon rst use, it is recommended to set the toasting intensity
to level 4 or 5. To toast another bread product, you can then choose
adierent toasting intensity level depending on the type of bread and
your taste preference.
■ Start the toaster by pushing down the control lever A10. The left lever
controls the left pair of toasting slots and the right lever controls the
right pair of toasting slots. The toasting process will automatically start
when the control lever A10 is locked in the lower position. Button A8
will be lit, the LED operating indicators A3 will be lit, and the set toasting
intensity level will appear on the display A5. The LED indicators A3 will
gradually turn o during operation.
Note:
Unless the toaster is connected to a power socket, the control
lever A10 will not lock in the lower position, and the toaster will
not start.
The toasting process can be stopped at any time during operation
by pressing button A8.
■ The toaster will turn o automatically and raise the inserted bread
product as soon as the toasting process is complete. The display A5,
LED indicators A3 and the backlight of button A8 will turn o. To toast
more bread products, remove the toasts from the toaster and repeat the
above described procedure.
Note:
The control lever A10 is equipped with a “High Lift” function that
lifts the bread product all the way up. This makes it easier to take
out smaller bread products.
Attention:
Never attempt to take out ajammed piece of bread or any other
bread product using aknife or another metal object. This could
lead to injury by electrical shock or damage the appliance. If bread
products become jammed inside the toaster, turn it o, disconnect
it from the power socket and allow it to cool down. Then carefully
remove the bread products.
■ After using the toaster, disconnect it from the power socket and allow it
to cool down.
Reheat toast function
■ This function makes it possible to heat up a toast without further
toasting. The setting on the timer A4 has no eect on this function.
■ Insert toasts into the slots A2 and push the control lever A10 down until
it is locked in the lower position. Button A8 will be lit, the LED operating
indicators A3 will be lit, and the set toasting intensity level will appear
on the display A5. To heat up atoast, press button A7. Button A7 will be
lit and the toast reheat mode will be started. The LED indicators A3 will
gradually turn o during operation.
■ The toaster will automatically raise the inserted bread products at the
end of the toast heating process. The display A5, LED indicators A3 and
the button backlights will turn o.
Note:
The toast reheating process can be interrupted at any time by
pressing button A8.
Toast frozen bread products function
■ Insert frozen bread products into the slots A2 and set the desired
toasting level. Push the control lever A10 down until it becomes locked
in the lower position. Button A8 will be lit, the LED operating indicators
A3 will be lit, and the set toasting intensity level will appear on the
display A5.
■ To toast frozen bread products, press button A9. Button A9 will be lit and
the toast frozen bread products mode will be started. In the rst phase,
the frozen bread products are defrosted, in the second phase they are
toasted. The LED indicators A3 will gradually turn o during operation.
■ The toaster will automatically raise the inserted bread products at the
end of the toasting process. The display A5, LED indicators A3 and the
button backlights will turn o.
Note:
The toast frozen bread products process can be interrupted at any
time by pressing button A8.
Note:
The reheat toast function and the toast frozen bread products
function cannot be set simultaneously.
Toasting rack
■ Place the rack A1 (one or two) on to the toaster as shown in gure A, and
then place the bread product (small baguette, bread roll or bun) that you
wish to toast on to it. Set alow toasting intensity in the range from 1 to 3
and push the control lever A10 down until it locks in the lower position.
The toasting process will start automatically. Button A8 will be lit, the
LED operating indicators A3 will be lit, and the set toasting intensity
level will appear on the display A5. The LED indicators A3 will gradually
turn o during operation.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor STS 5070 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sencor STS 5070

Sencor STS 5070 Bedienungsanleitung - Holländisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info