Bedienungsanleitung Sencor SVC 0625 (Seite 9 von 10) (Englisch)

759497

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

- 9 - 12/2019

Tip:

This vacuum cleaner contains a built-in Li-ion battery.

To ensure the longest possible lifetime of the battery, we

recommend:

– do not unnecessarily leave the battery fully charged or

completely at for too long,

– do not keep the battery permanently fully charged. Its

lifetime will be extended by keeping it at approximately

half charge.

– do not fully discharge the battery.

USING THE VACUUM CLEANER

1. Upright vacuum cleaner

■ You may use the vacuum cleaner for vacuuming various types of

oor coverings such as for example hard oor coverings, carpets,

etc.

■ Hold the vacuum cleaner by the handle A1 and pulling it

upwards, remove it from the charging base A23. After removing

from the charging base A23, the vacuum cleaner should be

secured in the vertical parking position. After releasing it from

the parking position, the handle may be moved in the vertical

direction.

■ Start the vacuum cleaner by pressing button A2. Use button A3

to regulate the suction power of the vacuum cleaner and the

speed of the rotary brush at two levels.

■ The LED indicators A16 signal the battery power level. The

individual LED indicators A16 will turn o as the battery gradually

discharges. If it is discharged fully, all the LED indicators A16 will

be o and the vacuum cleaner will stop running.

■ When you have nished using it, turn o the vacuum cleaner by

pressing the button A2. Clean it according to the instructions

contained in chapter Maintenance and cleaning, and allow it

to charge according to the instructions contained in chapter

Charging the vacuum cleaner.

2. Hand vacuum cleaner

■ Turn on the hand vacuum cleaner by pressing button A15. You

may use it for vacuuming locally soiled oor coverings, furniture,

etc. Vacuuming hard to reach places is made easier by the slot

nozzle A21 and upholstered furniture by the brush nozzle A22.

■ When you have nished using it, turn o the vacuum cleaner by

pressing button A15 again. Clean it according to the instructions

contained in chapter Maintenance and cleaning, and allow it

to charge according to the instructions contained in chapter

Charging the vacuum cleaner.

3. Cat & Dog Mini motorised brush

Cat & Dog Mini motorised brush A25 is provided with its own

electric motor. Attach the motorised brush A25 to the hand

vacuum cleaner A7. Turn on the hand vacuum cleaner by pressing

button A15. You may use it for vacuuming upholstery furniture or

car interior. It easily removes hair or animal fur from the furniture,

carpet, floor or car interior.

When you have finished using it, turn off the vacuum cleaner by

pressing button A15 again. Clean it according to the instructions

contained in chapter Maintenance and cleaning, and allow it

to charge according to the instructions contained in chapter

Charging the vacuum cleaner.

4. Using the mop attachment

Attach the mop cover G4 to the surface G5. Place the mop

attachment G1 with the attached mop cover G4 on the ground.

Fill in the tank G2 by water or solution with the cleaning detergent.

Avoid spilling water / solution from the filling outlets G3 of the

tank G2. Place the vacuum cleaner above the mop attachment G1

so that the projections on the attachment G1 were aligned with

the holes at the bottom part of the floor nozzle A9. Wheels should

fit in the construction of the attachment G1 - see picture H. Slightly

push the vacuum cleaner down until you hear a click sound.

That signalizes the correct securing of the attachment G1 to the

floor nozzle A9. Turn on the vacuum cleaner, and meanwhile you

vacuum, the wheels will push on the switches in the attachment

G1, these will release water / solution through the panel G6 into

the mop cover G4 which will wipe the floor.

Note:

Regularly check the level of water / solution in the tank

G2 and fill it in if needed.

If you no longer use the mop attachment G1, pull up the vacuum

cleaner. The switches in the attachment G1 will be automatically

released and water / solution stops flowing.

MAINTENANCE AND CLEANING

■ Before cleaning, always make sure that the vacuum cleaner

is turned o and the power adapter is disconnected from the

power socket.

Dust container and filters

■ Disassemble the hand vacuum cleaner A7 according to the

instructions in chapter Assembly and disassembly. Remove the

contents of the dust container A11, rinse it out with water and

thoroughly wipe dry.

■ Remove dust and dirt from the external lter A13. Wash it

under running water and then dry thoroughly, or allow it to dry

naturally.

■ In the event that the internal HEPAtype lter A12 is soiled, wash

it under a gentle current of running water and allow it to dry

naturally.

Attention:

Before assembling the vacuum cleaner, make sure that

all its parts are completely dry. Prior to starting it, make

sure that all the filters are properly installed in their place.

Otherwise, this could damage the vacuum cleaner.

When filters are soiled, their effectiveness is reduced, so

do not neglect their cleaning.

■ After 6 months of use, we recommend replacing the internal

HEPAtype lter A12 for anew one. Spare lters are available at

brick and mortar, and online stores.

Floor nozzle and attachments

■ If the rotary brush is soiled by hair or animal fur, remove the oor

nozzle A9 from the body of the vacuum cleaner A6. Turn it so

that the rotary brush is pointing upwards. On the left side of the

nozzle A9 there is alatch that secures the brush cover in place,

see g. F1. Release the latch, tilt open the cover and take out the

brush (see g. F2).

■ Remove all dirt and dust from the rotary brush and the internal

space of the oor nozzle A9. After cleaning, return the rotary

brush back in its place. Tilt the cover back and secure in place.

■ For cleaning the surface of the oor nozzle A9 and the

attachments A21 andA22 use adry or alightly dampened cloth.

Then wipe everything so that it is thoroughly dry.

Outer surface of the vacuum cleaner

■ Clean the outer surface of the vacuum cleaner using a dry or

a lightly dampened cloth. Then wipe everything so that it is

thoroughly dry. Pay special attention when cleaning the body

of the upright vacuum cleaner A6. In the part where the suction

opening A20 is located, dust may accumulate, which needs to be

removed regularly.

Sencor SVC 0625 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info