Bedienungsanleitung Sencor SVC 9300 (Seite 8 von 8) (Englisch)

759478

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

05/2019

- 8 -

STORING ACCESSORIES

■ The vacuum cleaner is equipped with ahandy accessory storage compartment. Press

button A5 to release the accessory compartment cover A6. Here you can place the

dusting brush A28 and the crevice nozzle A29.

CLEANING AND MAINTENANCE

■ Disconnect the power plug from the power socket before cleaning.

Warning:

To prevent the risk of injury by electrical shock, do not submerge

theappliance, power cord or power plug in water or any another

liquid.

Changing the dust bag

■ When the indicator is lit red, it indicates the need to replace the dust bag or aclogged

suction hole. In the event that the suction hole becomes clogged, remove the items

that are clogging it. To replace the dust bag, proceed as follows.

■ Press button A3 to tilt open the dust bag compartment A20. Remove the used dust

bag from the holder A19 and insert anew bag of the same type. Then close the cover

A3. The vacuum cleaner is equipped with asafety mechanism that prevents the cover

A3 from being closed unless the bag is correctly inserted or when it is not inserted

at all.

■ If the dust bag is not replaced in time, the vacuum cleaner’ssuction power will be

reduced.

Note:

Sometimes, while vacuuming, the indicator may briefly be lit red, which

does not indicate afull dust bag, but rather that suction power is set

too high for the given type of vacuumed surface. In such acase, reduce

the suction power.

Cleaning and replacing the inflow and outflow filters

■ Press button A3 to tilt open the dust bag compartment A20. Take out the dust bag

A20. Remove the protective grille of the inflow filter A18. Take out the inflow filter

A17 and tap it out away from living areas. Then put it back in, insert the dust bag A20

and close the cover A3. In the event that the inflow filter A17 shows signs of wear, or

is heavily soiled, replace it with anew one.

■ In order to clean and replace the HEPA filter A15, which is located at the rear of the

vacuum cleaner, press the clips on the removable grille A16 and take it out. Then take

out the HEPA filter A15. Tap it out away from living areas. Wash the HEPA filter A15

under aweak current of running lukewarm water so that the water washes the dirt out

of the folds. Allow it to dry naturally. Then insert it back in its place. It is recommended

to replace the HEPA filter A15 with anew one after 6 months of use.

Attention:

Before putting the filters back into the vacuum cleaner, make

sure that they are completely dry.

When filters are soiled, their effectiveness is reduced, so do not

neglect their regularly cleaning.

Cleaning the accessories

■ If the accessories are soiled, remove them from the vacuum cleaner and clean all dirt

off of them (dust, hair, animal fur, etc.).

■ To make removing hair wound on to the rotary brush easier to remove, you may cut

this hair using scissors.

Cleaning the turbo brush

Release the latches along the sides of the turbo brush A23, see figure C1. Remove the

front cover and remove all dirt, hair, animal fur, etc. from the rotary brush and the inner

area. After cleaning, put the front cover back and secure it in place using the locking

latches.

Press the cover latches located on the underside of the turbo brush A23 to release them,

see figure C2. Remove the cover and remove any soils from the inner area of the turbo

brush A23. Put the cover back in its place. An audible click will be heard when it slides

back into place.

Cleaning the outer surface of the vacuum cleaner

Clean the outer surface using adry or alightly dampened cloth. Then wipe it thoroughly

dry.

For cleaning the vacuum cleaner, do not use steel wool, abrasive cleaning products,

solvents etc.

TECHNICAL SPECIFICATIONS

Rated voltage range ............................................................................................................. 220 – 240 V~

Rated frequency ........................................................................................................................... 50 / 60 Hz

Rated power input ............................................................................................................................. 600 W

Power source of remote control ........................................................ 2× 1.5 Vtype AAA batteries

Noise level ......................................................................................................................................... 59 dB(A)

The declared noise emission level of the appliance is 59 dB(A), which represents alevel

Aof acoustic power with respect to areference acoustic power of 1 pW.

Safety class for electrical shock protection:

Class II – Electrical shock protection is provided by double or heavy-duty

insulation.

We reserve the right to change text and technical specifications.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL

OF USED PACKAGING MATERIALS

Dispose of used packaging material at asite designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric

or electronic products must not be added to ordinary municipal waste.

For proper disposal, renewal and recycling hand over these appliances

to determined collection points. Alternatively, in some European Union

states or other European countries you may return your appliances to

the local retailer when buying an equivalent new appliance.

Correct disposal of this product helps save valuable natural resources

and prevents potential negative effects on the environment and human

health, which could result from improper waste disposal. Ask your local authorities or

collection facility for more details.

In accordance with national regulations penalties may be imposed for the incorrect

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier for

the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product, request

the necessary information about the correct disposal method from the local council or

from your retailer.

This product meets all the basic requirements of EU directives related to it.

Sencor SVC 9300 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info