759145

Sencor SWK 1591 Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
- 6 - 08/2020
Copyright © 2020, Fast ČR, a.s.
EN Variable temperature
electric kettle
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ Carefully unpack the appliance and take care not to throw away any part of
the packaging before you find all its parts. We recommend saving the original
cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION
A1 Lid
A2 Spout
A3 Digital display
A4 Control panel
A5 Base stand with central connector
A6 Open lid button
A7 Handle
A8 Feet
B1 ON/OFF button
When this button is pressed while
the kettle is turned off, it will start
flashing and set the kettle into
stand-by mode. Pressing this button
when the kettle is in the stand-by
mode will turn the kettle off.
B2 BOIL mode (boil water)
Heats water to 100°C and
automatically turns off.
B3 KEEP WARM mode (maintains
atemperature)
Heats water to aset temperature
and then automatically maintains
this temperature for 2 hours.
B4 TEMP SEL mode (temperature
selection)
Enables setting the heating of
water in the range 40-90°C in 10°C
increments.
BEFORE FIRST USE
■ Remove all wrapping material from the electric kettle and its base stand.
■ Fill the kettle with clean water up to its maximum water mark (MAX) inside the
kettle. Boil the water and empty the contents of the kettle. Repeat this process 2 to
3 times. To boil water, proceed according to the instructions in chapter Operation.
OPERATION
Attention:
The electric kettle is intended only for heating water. Never heat
any other liquids or substance in it.
■ Place the base stand on astable, even and clean surface. Insert the power plug into
apower socket. The kettle will beep but neither the display nor the buttons will
be lit.
■ Fill the kettle with the required amount of water. You may fill it through the spout
or through the opening after lifting the lid. To open the lid, press button A6. The
water level must reach at least the minimum mark (MIN) but must not exceed the
maximum mark (MAX). After filling it up, properly close the lid and place it on the
central connector of the base stand.
Attention:
Never fill the kettle when it is placed on the base stand.
Turning on and stand-by mode
■ Turn on the kettle by pressing button B1 (ON/OFF). The kettle will enter stand-by
mode, meaning that it is ready for operation. Button B1 (ON/OFF) will start flashing
and the current water temperature will be shown on the display.
■ If you do not press any button within three minutes of turning on the kettle, it will
automatically turn off, and to turn it on again it is necessary to press button B1 (ON/
OFF).
Note:
If the kettle is taken off the base stand in the stand-by mode or any other
mode, the symbol – – – – will appear on the display. If you return the kettle
to the base stand within 30 seconds of lifting it off, the set temperature or
selected mode will be retained. If you return it later than this, the kettle
will enter the stand-by mode.
Heat Water to 100°C
■ When button B2 (BOIL) is pressed in the stand-by mode, the display will first show
100°C, and afew moments later the current temperature of the water. The water
will then start being heated and button B1 (ON/OFF) will remain permanently lit.
Attention:
Never start the kettle empty without water. The incorrect use of
the kettle may negatively affect its working order and lifetime.
■ When the temperature of the water reaches 100 °C, the kettle will beep and
automatically switch to the stand-by mode and button B1 (ON/OFF) will turn off.
Note:
The operation of the kettle can be stopped at any time by pressing
button B1 (ON/OFF).
■ Pour the boiled water into aprepared container, cup or mug. When carrying it, hold
the kettle upright, particularly when it is filled all the way up to the maximum mark.
■ If you wish to fill the kettle again and start heating immediately after pouring in
the water, wait approximately 30–60 seconds. When opening the lid, be especially
careful to avoid scalding yourself with boiling water or steam.
Heating water to arequired temperature
■ The kettle enables water to be heated to atemperature in the range from 40°C to
90°C. Select the temperature using button B4 (TEMP SEL).
■ Repeatedly press button B4 (TEMP SEL) to select the required temperature. The
selected temperature value will always appear on the display first, and after afew
moments the current water temperature will be shown and heating will commence.
When the temperature is reached, the kettle will beep and switch to the maintain
set temperature mode.
■ If the current temperature of the water in the kettle is higher than the temperature
you set, the kettle will beep and turn off.
Maintaining temperature (Keep warm)
■ When button B3 (KEEP WARM) is pressed, the temperature 90°C will always appear
on the display and this temperature will be maintained. If you wish to maintain
adifferent temperature, use button B4 (TEMP SEL) to set atemperature in the range
40–90°C.
■ The selected temperature is maintained for 2 hours. When this time elapses, the
kettle will beep and switch to the stand-by mode.
■ Maintaining temperature can be stopped at any time by pressing button B1 (ON/
OFF).
Note:
When using the maintaining temperature mode, consider whether this
function is really necessary. You will contribute to lowering the impact of
electrical appliances on the environment.
Turning off
■ To turn off the kettle after use, press button B1 (ON/OFF). The button will turn off
and the kettle will turn off.
■ When not using the kettle, empty it out and place it away from the base stand.
■ When not using the kettle for an extended period of time, we recommend
disconnecting the power cord from the power socket.
PROTECTION AGAINST BOILING WITHOUT WATER
■ If you accidentally turn on the kettle without water, the thermostat will, after
reaching a certain temperature, interrupt the electric circuit. The kettle will turn
off, button B1 (ON/OFF) will turn off and the display will show the message ERR.
The kettle can be used again after several minutes, once the heating bottom has
cooled down.
Attention:
Even though the kettle is equipped with protection against boiling
without water, do not turn it on when empty. The incorrect use of
the kettle may negatively affect its working order and lifetime.
CLEANING AND MAINTENANCE
Attention:
Prior to any cleaning or maintenance, always disconnect the
power cord of the base stand from the power socket and allow
the kettle to cool down.
Do not wash the kettle, its base stand or power cord under
running water and do not submerge them in water or another
liquid.
■ To clean the external parts of the kettle, use adry cloth or acloth dipped in aweak
solution of neutral kitchen detergent. Never use solvents, cleaning products with an
abrasive effect, etc. After washing, wipe the surface with aclean, lightly dampened
cloth and then wipe dry.
■ Wipe the internal parts of the kettle using asoft sponge or clean cloth dipped in
clean warm water. Do not use detergents or any other chemical agents on the
internal parts. After cleaning the kettle, rinse it out several times with clean water.
■ To clean the base stand, use only adry cloth.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sencor SWK 1591 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info