Bedienungsanleitung Sencor SWK 1750 (Seite 5 von 6) (Englisch)

759072

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

05/2017

- 5 -

EN Electric Kettle

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even if you already have experience in using similar appliances.

Only use the appliance in the manner described in this user’smanual. Keep this user’smanual in asafe place where it can be easily

retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or

warranty card for at least the duration of the legal liability for unsatisfactory performance or quality. In the event of transportation, we

recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE KETTLE

A1 Lid with alid lock for securely closing the lid

A2 Spout with aremovable filter inside

A3 Base with acentral connector

A4 Button for opening the lid

A5 Water level indicator

A6 Handle

A7 I/0 switch (on/off indicator light)

BEFORE FIRST USE

1. Remove all packaging material from the kettle and its base.

2. Fill the kettle with clean water up to the maximum water mark. Boil the water and empty the contents of the kettle. Repeat this process

two to three times.

Note:

To boil water in the kettle, proceed according to the instructions in chapter Using the kettle.

3. Now the electric kettle is ready for operation.

USING THE KETTLE

1. Set the desired length of the power cord. Push the power cord into the groove in the base. Place the base on astable, even and clean

surface.

2. Fill the kettle with the required amount of water. The water level must reach at least the minimum mark (0.7 l) and must not exceed the

maximum mark (1.7 l). You may fill the kettle through the spout or through the opening after lifting the lid. The lid can be opened by

pressing the button located on the handle. After filling the kettle with water, close the lid and push it down so that it is secured in the

closed position.

Warning!

Never fill the kettle when it is located on the base.

If the electric kettle is overfilled, then boiling water could splash out.

3. Place the kettle on the base. Insert the power plug into an electrical power socket. Check that the lid of the kettle is closed.

4. Start the kettle by setting the switch to position I(On). The switch will be lit.

Attention:

Do not turn on the kettle when it is empty. The incorrect use of the kettle may negatively affect its lifetime. If you accidentally turn

on the electric kettle without water, the thermostat will, after reaching acertain temperature, interrupt the electric circuit and the

switch light will turn off. The kettle can be used again after several minutes, as soon as its stainless steel bottom has cooled down.

5. When the water starts to boil, the kettle will turn off automatically and the switch light will turn off. Before taking the kettle off the base,

check that it has turned itself off automatically. If it has not automatically turned itself off, turn off the kettle manually by setting the

switch to position 0 (Off).

Note:

The operation of the kettle can be interrupted at any time by setting the switch to position 0 (Off).

6. Pour the boiled water into aprepared container, cup or mug. Make sure that it remains in avertical position when it is carried, particularly

if it is filled all the way up to the maximum mark.

If you wish to open the lid to refill the kettle, first empty all the contents of the kettle so that you are not scalded by the escaping steam.

7. After you finish using the kettle, disconnect the power cord from the el. power socket. Empty the kettle and allow it to cool down.

CLEANING AND MAINTENANCE

■ Regularly remove water scale deposits from inside the kettle based on how frequently the kettle is used. During standard use of the kettle

(3 to 5 times per day), we recommend to remove water scale deposits:

– once per month in areas with hard and very hard water;

– once every two to three months in areas with soft and medium hard water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SWK 1750 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor SWK 1750

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info