06/2017
- 5 - Copyright © 2017, F
EN
V
Elec
User'smanual
■ Prior to using this appliance, please r
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described
in this user’smanual. Keep this user’
easily retrieved for future r
■ We rec
purchase receipt and responsibility statement of the v
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we rec
appliance in the original box from the manufacturer
DESCRIPTION OF
A1 Lid lock
serves to safely close the lid.
A2 Lid
A3 Spout
A4 Removable ltration strainer
is located inside the kettle.
A5 Water lev
A6 Base with acentral connector
A7 LED display
A8 Control buttons
A9 Handle
DESCRIPTION OF
B1 Display current or set
temperatures
B2 Keep W
B3 Decrease temperature button
B4 On/O button
B5 Increase temperature button
B6 Button for setting and ending
the Keep W
Note:
Buttons B3 and B5 can be used to set 10 temperature levels in the
range from 45 to 90
changes by 5
BEFORE FIRST USE OF
1. Remove all wrapping material from the kettle and its base A6 .
2. Fill the kettle with clean water up to the maximum w
and empty the contents of the kettle. Repeat this process 2 t
Note:
T
in chapter Using the kettle.
3. Now the kettle is ready for operation.
USING THE KET
1. Set the desired length of the power cord. Push the power c
in the base A6 . Place the base A6 on astable, even and clean surface.
2. PA1 to release and open the lid A2 . Fill the kettle with the
required amount of water
mark (0.5l) and must not exceed the maximum mark (1.7l). After lling it, close
the lid A2 and make sure that it is secured in the closed position.
Attention:
Do not ll the kettle when it is placed on the base A6 .
When lling the kettle, there is arisk of water splashing out.
3. PlacA6 and insert the power cord plug into apower
socket. When the po
A7 is lit for amoment and ashort beep is made.
stand-by mode and is ready for use.
4. Operating mode settings:
4.1
■ To start the water boiling procB4 . Abeep is made when the
button is pressed.
to 100 A7 .
When the water comes to aboil, the kettle will turn o automatically. It will
beep 5 times and the display A7 will turn o.
Note:
The water boiling process can be stopped a
button B4 .
4.2
■ First, use the buttons B3 and B5 to set the temperatur
to be maintained in the Keep
can be set in the range from 45 to 90 B3 or B5 is
pressed for the rst time, the curren
will be shown on the display A7 . Press the butt
water temperature mode
the previously set water temperaturA7 . When
button B3 or B5 is pr
increase by 5 B4 and B6 in any
orderA7 and indicatB2 will be lit, and the
water boiling process will start. Once the water has come to aboil, the kettle
will beep 5 times and automatically switch to the Keep
temperature set for the Keep A7
and indicator B2 will be lit. In this mode, the heating element automatically
switches on and o to maintain the set temperature
element is indicated by the ashing item on the display A7 .
Keep W
kettle will turn o automatically
button B6 .
Note:
If you set atemperB6 or B4 within a
period, the kettle will switch back to the stand-by mode and the display
A7 will turn o.
If you press button B4 during the water boiling process
mode will end immediately and the kettle will switch to the Keep
mode.
The set temperature can be adjusted during the Keep
4.3
■ UB3 and B5 to set the temperature in the range from 45 to 90
When either button B3 or B5 is pressed for the rst time
temperature inside the kettle will be shown on the displaA7 . Press the button
again to switch to the set water tempera
temperature of 60
the display A7 . When button B3 or B5 is pressed again, the temperature setting
will decrease or increase by 5
temperature, prB6 . Indicator B2 will be lit and the temperature value
will ash on the display A7 . W
on the display A7 will stop ashing and the kettle will automatically switch
to the Keep W
automatically switches on and o to maintain the set temperatur
of the heating element is indicated by the ashing item on the display A7 .
The time of the Keep W
elapsed, the kettle will turn o automatically
soonerB6 .
Note:
The operation can be stopped at any time bB6 .
If you set atemperature and do not press button B6 to start the water
heating process within ashort period, the kettle will switch back to the
stand-by mode and the display A7 will turn o.
If you set a
the water inside the kettle, then after button B6 is pressed
on the display A7 will be lit.
has already been reached. As soon as the wat
temperature , it will be maintained at this tempera
The set temperature can be changed while the appliance is running
Attention:
If the kettle is not located on the base A6 , the control buttons A8 will
not react to being pressed.
Lifting the kettle o the base A6 will cancel all previous settings.
the kettle is put back on the base A6 , the kettle will switch to stand-by
mode and is again ready for use.
This kettle is not calibrated for scientic or labora
The actual water temperature may di
temperature.
Attention:
Do not turn on the kettle when it is empty. Incorrect use may negatively
aect its lifetime. If you accidentally turn on the kettle without wat
inside, after ashorA7 will turn o and the kettle will
turn o.
abeep and the display A7 being lit for ashort time.
switch to stand-by mode and is again ready for use
5. Pour the boiled or heated wa
sure that the kettle remains in a
if it is lled all the way up to the maximum mark.
6. If you wish to rell the kettle, be especially careful when opening the lid A2 to
avoid scalding by the escaping steam.
7. After you nish using it, disconnect the power cord fr
Empty the kettle and allow it to cool down.
