Bedienungsanleitung Sencor SWK 1771 (Seite 5 von 6) (Englisch)

759086

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

06/2017

- 5 -

EN Electric Kettle

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases, when one has already familiarised themselves with

previous use of similar types of appliances. Only use the appliance in the manner described in this user’smanual. Keep this user’smanual in

asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or

warranty card for at least the duration of the legal liability for unsatisfactory performance or quality. In the event of transportation, we

recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE ELECTRIC KETTLE

A1 Lid

A2 Spout with removable ltration strainer inside

A3 Water level mark

A4 Base with a central connector

A5 Open lid button

A6 Handle

A7 0/I switch (o/on) with power indicator light

BEFORE FIRST USE OF THE ELECTRIC KETTLE

1. Remove all wrapping material from the fast boil kettle and its base A4.

2. Fill the kettle with clean water up to the maximum water mark. Boil the water and empty the contents of the kettle. Repeat this process

2 to 3 times.

Note:

To boil water in the fast boil kettle proceed according to the instructions in chapter Using the fast boil kettle.

3. Now the kettle is ready for operation.

USING THE ELECTRIC KETTLE

1. Set the desired power cord length and push it into the groove in the base A4. Place the base A4 on astable, even and clean surface.

2. Fill the kettle with the required amount of water. You may ll it through the spout A2 or through the opening after lifting the lid A1. To open

the lid A1, press button A5. The water level must reach at least the minimum mark (0.5l) but must not exceed the maximum mark (1.7l). After

lling the kettle, properly close the lid A1.

Attention:

Do not fill the kettle when it is placed on the base A4.

3. Place the kettle on the base A4. Insert the power plug into apower socket and set the switch A7 to position I(On) to start the kettle.

The power indicator light will be lit.

Attention:

Do not turn on the kettle when it is empty. The incorrect use of the kettle may negatively affect its lifetime. If you accidentally turn on

the kettle without water, the thermostat will, after reaching acertain temperature, interrupt the electric circuit. The switch A7 will move

to position 0 (Off) and the indicator light will turn off. The kettle can be used again after several minutes, once the heating bottom has

cooled down.

4. As soon as the water boils, the kettle will turn o automatically and the power indicator light will turn o.

Note:

The operation of the kettle can be interrupted at any time by setting the switch A7 to position 0 (Off).

5. Pour the boiled water into aprepared container, cup or mug. Make sure that the kettle remains in avertical position when it is carried,

particularly if it is lled all the way up to the maximum mark.

6. If you wish to rell the kettle, be especially careful when opening the lid A1 to avoid scalding by the escaping steam.

7. After you nish using it, disconnect the power cord from the power socket. Empty the kettle and allow it to cool down.

CLEANING AND MAINTENANCE

■ Before cleaning it, make sure that the kettle is turned o, disconnected from the power socket, and allow it to cool down.

■ To clean the external parts of the kettle, use adry cloth or acloth dipped in aweak solution of neutral kitchen detergent. After applying the

kitchen detergent, wipe the surface with alightly damp cloth and then wipe dry.

■ To clean the base A4 use only adry cloth.

■ Never use solvents, abrasive cleaning agents, etc.

Cleaning the ltration strainer

■ The removable lter serves to capture limescale, and thereby prevents it from being poured into acup together with the water. Regularly clean

the lter under running water using ane nylon brush or submerge it for several hours into avinegar – water solution (recommended dilution

ratio 1:2). After applying the solution, rinse the lter under clean running water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SWK 1771 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sencor SWK 1771

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info