04/2017
- 5 -
Copyright © 2017, F
EN
V
Elec
User'smanual
Prior to using this appliance, please r
in cases, when one has already familiarised themselves with previous use
similar types of appliances. Only use the appliance in the manner described
in this user’smanual
easily retrieved for future r
We r
purchase receipt and responsibility statement of the v
card for at least the duration of the legal liability f
performance or quality. In the event of transportation, we recommend that
you pack the appliance in the original box from the manufacturer
DESCRIPTION OF
A1 Open lid button
A2 Lid
A3 Spout
A4 Water level mark
A5 Base with acentral connector
A6 Control panel
A7 Handle
A8 Internal LED light
DESCRIPTION OF
B1 T
B2 Set temperature touch button – 60, 70, 80 and 90 °C.
B3 On/O
BEFORE FIRST USE OF
1. Remove all wrapping material from the kettle and its base A5 .
2. Fill the kettle with clean water up to the maximum water mark. Boil the
water and empty the contents of the kettle. Repeat this pr
Note:
T
chapter Using the kettle.
3. Now the kettle is ready for operation.
USING THE
1. Set the desired length of the power cord. P
groove in the base A5 . PlacA5 on a stable, even and clean
surface.
2. Fill the kettle with the requirA2 , press
button A1 .
must not exceed the maximum mark (1.8l). After filling it, close the lid A2
and make sure that it is secured in the closed position.
Attention:
Do not fill the kettle when it is placed on the base A5 .
When overfilling, there is arisk of boiling water splashing out.
3. Place the kettle on the base A5 and insert the power cord plug into apow
socket. W
is made, the control panel A6 and the LED light A8 is lit f
The kettle will then switch to standby mode and is ready f
mode, the red indicator on button B3 will flash.
4.
4
TB3 . Asound signal confirms
that the button was pressed. B3 will be lit, the kettle
will start heating water to 100 A8 is lit
red.
LED light A8 will turn off and the indicator on button B3 will start flashing.
Note:
The water boiling process can be st
pressing button B3 or lifting the kettle off the base A5 .
4.2
Press button B3 and hold it down f
be made and the indicator on buttons B2 and B3 will be lit.
start heating water to 100 °C. During operation, the LED light A8 will flash
red.
Once the water has come to a sound signal will be made and the
kettle will automatically switch to the keep warm mode. A8
flashes constantly and the indicators on buttons B2 and B3 remain lit. In this
mode, the heating element automatically switches on and off to main
temperature.
this time has elapsed, the kettle will turn off automatically
this mode soonerB3 or lift the kettle off the base A5 .
4.3
Press button B3 and then use button B2 to select the desired temperature
of 60, 70, 80 or 90
is pressed, and is indicated by the r B1 being lit. Each
press of the button is accompanied by ashort beep.
water to the selected temperature and during operaA8
will be lit:
–
–
–
–
When the set temperature is reached
The respective indicator B1 will be flashing on the contrA6 and
the control buttons are not lit. A
standby mode.
Note:
The temperature setting can be changed while the appliance is
running.
If you set a
water inside the kettle, asound will be made and the kettle will turn
off automatically
4.4
Press button B3 and hold it down f
made. Use button B2 to select the desired temperatur
The temperature setting changes each time the button is pr
indicated by the respective indicator B1 being lit. Indicator lights B2 and
B3 will be lit.
during operation the LED light A8 will be flashing:
–
–
–
–
When the set temperature is reached sound signal will be made and
the kettle will switch to the keep warm mode. A8 flashes
constantly and the indicators on buttons B2 and B3 and the respective
indicator B1 remain lit. In this mode, the heating element automatically
switches on and off to maintain the set temperature
mode is preset to 120 minutes. After this time has elapsed
turn off automaticallyB3
or lift the kettle off the base A5 .
Attention:
If the kettle is not located on the base A5 , the control buttons B2 and
B3 will not react to being pressed.
Lifting the kettle off the base will cancel all previous settings.
the kettle is put back on the base A5 , the kettle will switch to standby
mode and is again ready for use.
This kettle is not calibrated for scientific or labor
actual water temperature may diff
temperature.
Attention:
Do not turn on the kettle when it is empty. Incorrect use may
negatively affect its lifetime. If you ac
without water
the heating element cools down. sound, the
control panel A6 and the LED light A8 being lit for an instant
the kettle will switch to standby mode and is again ready for use
5. Pour the boiled or heated wat prepared container
Make sure that the kettle remains in a
particularly if it is filled all the way up to the maximum mark.
6. I
steam or to burn yourself on the hot surface of the lid A2 when opening or
closing it.
7. After you finish using it, disconnect the power cord from the power socket.
Empty the kettle and allow it to cool down.
