Symbols Function / Meaning Recommended Action
Standby and Turn the device on.
Battery installation guide
Direct current
Serial number
Type BF: Device, cu and tubing are designed to
provide special protection against electrical shocks.
The indicator that appears while measurement is in
progress. It blinks when the pulse is detected.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an irregular heartbeat
or any excessive body movement is detected during the
measurement.
Previous measurements stored in MEMORY.
The battery power indicator during measurement.
The battery is low when it blinks.
Unstable blood pressure due to movement during the
measurement.
The systolic and diastolic values are within 10 mmHg of
each other.
The pressure value did not increase
during ination.
The cu is not fastened correctly.
The pulse is not detected correctly.
Systolic blood pressure in mmHg
Diastolic blood pressure in mmHg
Pulse per minute
EC directive medical device label
WEEE label
Flashes when there is air remaining in the cu at
power up. Flashes at the completion of the
measurement until exhaust is complete.
Flashes when pressure is insucient for the
measurement.
Measurement is in progress.
Remain as still as possible.
Replace all batteries with
new ones.
Try the measurement again.
Remain very still during the
measurement.
Fasten the cu correctly, and
try the measurement again.
Press the exhaust valve button
to exhaust air from the cu.
Pump air into the cu with
the rubber bulb.
10
