Bedienungsanleitung Sendo S360 (Seite 13 von 73) (Englisch)

630198

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

[[[

]]]

The basics

3 The basics

Switching on/off

To switch the phone on, press d.

If the phone asks for a PIN code, enter the

code that is supplied with the SIM card. The

code will be displayed as asterisks. When

complete, press g, OK.

When you switch the phone on for the first

time (or after removing the battery) you may

also be asked to enter the date (in the format

dd/mm/yyyy). When complete, press g,

OK. You will then be asked to enter the time

(in 24 hour format). When complete, press

g, OK.

> Note: If you make a mistake, use the [

and ] navigation keys to move between

the characters.

Wait a few seconds while the phone searches

for the network. Once the network has been

found, the main screen appears and your

phone is ready to be used. The main screen

shows the network name and two icons

giving the signal strength (top right) and

battery level (top left).

To switch the phone off, press and hold d.

Navigation and scrolling

To enter the main menu on your phone, press

g, Menu from the main screen.

You can scroll through menus using the up

and down keys, : and ;. When you find

the menu option that you are looking for,

press g, Select to activate. Press d, Back

or c to return to the previous level.

In certain features such as entering text

messages, you can also use the left and right

keys, [ and ], to scroll left and right.

When scrolling in menus or messages,

continue to hold :, ;, [ or ] to increase

the scrolling speed.

? Tip: See the Shortcuts section on Page 10

for details of useful menu shortcuts.

My number

Your phone number is stored on your SIM

card and should be stated in the

documentation that came with the card.

If you need to remind yourself of your

number, try calling another mobile phone

and make a note of the number that appears

on that phone’s display. Alternatively, contact

your network service provider.

Your number may also be available through

the My number feature (if set by your network

service provider). Press d, Contacts from

the main screen and select the My number

option. Select Consult, press d, Options

and select Details to display your phone

number (press c to return to previous

screens).

Screensaver

A screensaver is a picture or animation that is

displayed when the phone has been idle for

a certain amount of time.

When the screensaver is displayed, press any

key to return to normal display (or press g,

Unlock then * if the keypad is locked).

To modify the screensaver settings, see the

Display settings section on Page 51.

Power save

To get better battery performance, your

phone will automatically switch to power save

mode after it has been idle for a certain

amount of time. In this mode, the screen’s

backlight is switched off and a clock is

displayed showing the current time.

When the power save mode is active, press

any key to return to normal display (or press

g, Unlock then * if the keypad is locked).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sendo S360 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info