Bedienungsanleitung Sendo S360 (Seite 57 von 73) (Englisch)

630198

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

[[[

]]]

Settings

Note: Voice mail is a network service. You

may have to subscribe to this service and

it may not be available when roaming.

Check with your network service provider

for details.

Security

Used to define your PIN security settings.

See the Security section below for details.

Factory settings

Select this option to reset the phone’s

settings to their original values. Press g,

OK to confirm the reset.

> Note: Not all settings can be restored to

their original values.

Security

The Security menu under Advanced settings is

used to define your PIN settings. Your PIN

(Personal Identity Number) is a code that you

can use to protect your phone against

unwanted use. This is the number that the

phone may ask for at switch on. The options

are as follows (depending on what PIN

activation settings you have selected):

Activate PIN

Enter your PIN at switch on (if your SIM card

supports this).

Deactivate PIN

You do not have to enter your PIN at switch

on.

Change PIN

Select this to change your PIN code.

Change PIN2

Some network services require a separate

security code - the PIN2 code. Select this

option to change your PIN2 code.

To activate, deactivate or change the PIN

code, you need to enter the current PIN code.

To change the PIN2 code, you need to enter

the current PIN2 code. If you don’t know your

PIN code or PIN2 code, contact your network

service provider.

If you enter the wrong PIN or PIN2 code three

times, the SIM card is locked and you may be

asked to enter a PUK (Personal Unlock Key)

code - these may be different for PIN and

PIN2. The PUK codes may be listed in the

information that you received with your SIM

card or they may only be available from your

network service provider.

> Note: The number of incorrect entries

depends on your network service

provider.

> Note: Sendo cannot provide your PIN or

PUK codes. Contact your network service

provider for information.

Data accounts

Find it: g Menu

Settings

Data accounts

Select this option to define the accounts used

for MMS and WAP services. These settings

may have already been configured on your

phone by your network service provider. If

your phone is not configured already, the

fastest and easiest way to do this is to visit:

http://www.sendo.com/config

to automatically configure your settings. The

Sendo Easy Configurator sends an SMS

message to your phone containing the

settings you require. Alternatively, you can

ask your network service provider to send you

this information (if available).

Data accounts are grouped into profiles. A

profile is a collection of settings for network

access. Select an account from the list

displayed to change the current settings, or

select Add new to define a new account. The

settings are as follows:

Name

A name for the account.

Username

The username to log on to the external data

network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sendo S360 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info