580810
30
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
29
Using the headset system
To start the conference call using the master headset:
¿
4
5
̈ Establish a wireless link between headset and base station (the LINK
LED ¿ flashes blue).
To add a guest headset to the conference call:
̈ Place the guest headset to be added to the conference call into the base
stat
ion of the master headset.
The HEADSET LED flashes blue/red and the headset pairs to the base
station. If pairing was successful, the HEADSET
LED li
ghts up blue.
̈ Take the guest headset out of the base station.
You hear a beep in the master headset.
̈ Press the LINK button on the master headset within 15 seconds.
The guest headset is enabled for the conference call.
̈ If necessary, repeat this procedure for the two other guest headsets.
̈ Call the other party.
To exit the conference call with a guest headset:
̈ Press the LINK button on the guest headset.
To end the conference call:
̈ Use the master headset to end the conference call.
The wireless links to all other headsets par
t
icipating in the conference
call are disconnected.
You can only end the conference call using the master headset.
Other functions such as volume adjustment and muting the
headset’s microphone can still be performed on each headset.
Adjusting the volume
WARNING Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects.
̈ Set the volume to a medium level.
̈ Do not continuously expose yourself to high volumes.
In order to be able to adjust the volume of the ring tone and the acoustic
si
gnals, the headset has to be in standby mode. In order to be able to
adjust the audio volume, a wireless link has to be established between
headset and base station (see page 23).
In PC mode, you can adjust the volume using the AUDIO button
or by using the volume control of your operating system (see the
instruct
ion manual of your operating system).
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sennheiser DW Pro1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sennheiser DW Pro1

Sennheiser DW Pro1 Installationsanweisung - Deutsch - 21 seiten

Sennheiser DW Pro1 Bedienungsanleitung - Deutsch - 45 seiten

Sennheiser DW Pro1 Installationsanweisung - Englisch - 21 seiten

Sennheiser DW Pro1 Installationsanweisung - Holländisch - 21 seiten

Sennheiser DW Pro1 Bedienungsanleitung - Holländisch - 45 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info