575962
25
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
61
SqELCH
DiSPL
Adjusting the squelch threshold (receiver section only)
The amplifier’s receiver section is equipped with an adjustable squelch which
eliminates annoying noise when the transmitter is turned off. It also suppresses
sudden noise when the transmitter leaves the reception area.
Ǡ Press the SET button to select the “SqELCH” menu. “SqELCH” appears on
the display; after a short pause the current squelch setting is indicated.
Ǡ With the ̆/̄ buttons you can now select a different setting. The squelch
can be turned off (0 dB) or adjusted in 5-dB steps from 5 dB to 40 dB.
(Selecting a smaller value reduces the squelch threshold, selecting a higher
value increases the squelch threshold.) The new setting starts flashing on
the display. Set the squelch threshold – with the transmitter turned off –
to the lowest possible value that suppresses hissing noise. With the squelch
set to a high value, the receiver section will be less sensitive to interference
but, on the other hand, the transmission range will be reduced.
Note:
If the receiver’s squelch is set to “0 dB” and you turn the transmitter off,
hissing noise with high dynamics will occur.
Ǡ Press the SET button to return to the top menu level. The display then
switches back to the standard display.
Selecting the content of the standard display
With both transmitter and receiver section you can choose the content of the
standard display i.e. whether the frequency (in MHz) or the channel number
is displayed.
Ǡ Press the SET button twice to select the “DiSPL” menu. “DiSPL” appears
on the display; after a short pause the current setting is indicated.
Ǡ With the ̆/̄ buttons you can now choose between:
Frequency: FrEqu
Channel number: ChAnnL
The new setting for the standard display starts flashing on the display.
Ǡ Press the SET button to return to the top menu level. The display then
switches to the new standard display.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sennheiser EMP 2015 Soundfield System wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info