690313
15
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
14 | MB 660
Getting started
Pairing the headset
CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the
operation of sensitive and unprotected devices.
X Only make calls with the headset in locations where Bluetooth is
permitted.
To pair your headset with a Bluetooth device, you can use NFC or the Bluetooth
search function. In order that a connection between the headset and a Bluetooth
device can be established, Bluetooth must be activated on both your headset
and the device.
The MB 660 Wireless headset complies with the Bluetooth 4.2 standard. In order
that data can be transmitted wirelessly using Bluetooth, you have to pair your
headset with a compatible Bluetooth device that supports the following profiles:
Hands Free Profile (HFP)
Headset Profile (HSP)
Audio/Video Remote Control Profile (AVRCP)
Advanced Audio Distribution Profile (A2DP)
Device ID Profile (DIP)
When you switch the headset on for the first time, it automatically enters
the pairing mode. If the headset has already been paired with a few devices,
it automatically tries to connect to the last two connected Bluetooth devices
when switched on. The headset can save the connection profiles of up to eight
Bluetooth devices with which it have been paired.
If you pair the headset with the ninth Bluetooth device, the saved connection
profile of the least used Bluetooth device will be overwritten. If you want to re-
establish a connection with the overwritten Bluetooth device, you have to pair
that device back with the headset.
You can instantly pair the headset with your device if the device supports NFC.
paired
paired +
connected
Using the headset with a PC and a Bluetooth USB dongle
To use the headset with a softphone, you either require a PC supporting
Bluetooth or an additional Bluetooth USB dongle (wireless audio transmitter
and receiver).
The BTD 800 USB or BTD 800 USB ML Bluetooth dongle is supplied together with
the MB 660 UC or MB 660 UC MS variants and is pre-paired with the headset.
To use the headset with a Bluetooth USB dongle:
X Plug the Bluetooth dongle into the USB port of your PC.
X Follow the instructions in the next chapter, as well as those given in the
instruction manual of your Bluetooth dongle.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sennheiser MB 660 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sennheiser MB 660

Sennheiser MB 660 Bedienungsanleitung - Deutsch - 37 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info