690299
27
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
SDW 5000 series headset system
CONFIGURING THE HEADSET SYSTEM26
Configuring the headset system
Configuring the headset system using HeadSetup™ Pro or the DIP switches
You can adjust the headset system via the software HeadSetup™ Pro or the DIP switches on the base station. Changes
in HeadSetup™ Pro overwrite the DIP switch settings.
HeadSetup™ Pro offers additional settings – marked with the adjacent icon in the following chapters. In
addition to the settings described here, HeadSetup™ Pro offers further configurations – see options in
the software.
1 2 3 4 5 6 7 8
S1 S2
To configure the system via the DIP switches:
Use a pointed object to set the DIP switches to the
desired position. After a DIP switch is changed:
Re-boot the system by disconnecting the power supply
and USB cable shortly from the power.
To configure the system via HeadSetup™ Pro:
Connect the base station to your computer and install
the required software (see page 13).
Start HeadSetup™ Pro.
Click on “Settings” in the menu and choose your
SDW 5000 device.
Change to the desired values and save.
Configuring the desk phone – DIP switches 1 and 2 – SDW 5 BS only
If you do not have a desk phone with an EHS solution, the HSL 10 II can be used for remote call control.
Switch position Function Switch position Function
1 2 3 4 5 6 7 8
DHSG mode
Call control with phones using DHSG
standard
1 2 3 4 5 6 7 8
Panasonic mode
Call control with Panasonic
phones
1 2 3 4 5 6 7 8
Manual mode
Manual operation* of handset or
handset lifter HSL 10 II
1 2 3 4 5 6 7 8
Auto link
Wireless link between headset
and base station established
automatically
1 2 3 4 5 6 7 8
OptiPoint mode
Call control with OptiPoint phones
1 2 3 4 5 6 7 8
MSH mode
Call control with phones using
MSH standard
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
No assigned modes
* For undetectable phones without call control: Touch the icon
to manually establish a link to the desk phone. A
second touch will close the link and allows to operate calls on other audio sources ( / ).
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

sennheiser-sdw-60-hs

Suche zurücksetzen

  • Ich habe kein TOn auf der Basis noch auf dem Headset Eingereicht am 26-12-2021 10:49

    Antworten Frage melden
  • Wie kann ich mein Headset nur mit dem Dongel am PC verbinden ? Brauche ich immer die Basis Station
    Eingereicht am 2-11-2021 15:50

    Antworten Frage melden
  • Ich habe das selbe problem. Wie kann man "MUTE ON" und "MUTE OFF" Stimme ausschalten? Das ist super nervig, dass man deswegen seinen Kunden nicht ordentlich versteht Eingereicht am 24-6-2021 14:11

    Antworten Frage melden
  • Hallo, wie kann man beim SDW 60 HS die "MUTE ON" und "MUTE OFF" Stimme ausschalten? Eingereicht am 5-3-2021 15:05

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sennheiser SDW 60 HS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sennheiser SDW 60 HS

Sennheiser SDW 60 HS Bedienungsanleitung - Deutsch - 57 seiten

Sennheiser SDW 60 HS Bedienungsanleitung - Holländisch - 57 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info