471976
11
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
ENFRITNLPTRUZH ES DE
Putting the XS WIRELESS systems into operation
XS WIRELESS | 7
Putting the XS WIRELESS systems into operation
Putting the receiver into operation
You can set up the receiver as a single device or mount it into a 19” rack. For information
on rack mounting and optional accessories (e.g. rack mount “ears” and remote antennas),
visit the XS WIRELESS product page at www.sennheiser.com.
Setting up the receiver
̈ Place the receiver on a flat, even surface.
Connecting the receiver to the mains
̈ Connect the connector of the mains unit to the DC socket C on the receiver.
̈ Connect the mains unit to a wall socket. The receiver switches on, the display panel is
backlit.
Connecting and aligning the rod antennas
The supplied rod antennas are suitable for all applications where – good reception condi-
tions provided a wireless transmission system is to be used without a large amount of
installation work. To increase the range, you can use remote antennas which are available
as accessories from your specialist dealer.
̈ Connect the two rod antennas to the BNC sockets
E and 8 at the rear of the receiver.
̈ Align the antennas in a V-shape.
Connecting the amplifier/mixing console
̈ Use a suitable cable to connect the amplifier or mixing console to the XLR-3M socket
9
or the ¼” (6.3 mm) jack socket 0.
̈ For a rough adjustment of the AF audio level, set the LINE/MIC slide switch
A to the cor-
responding position.
̈ Use the volume control 7 of the receiver to optimally adjust the AF audio level to the
input of the amplifier or mixing console.
CAUTION
Risk of staining furniture surfaces!
Furniture surfaces are often treated with varnish, polish or synthetics which might cause
stains when they come into contact with other synthetics such as the device feet.
̈ Do not place the receiver on delicate surfaces; if necessary, place a pad under the
receiver.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sennheiser XSW 35 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info