Bedienungsanleitung Sentry DH-134E - Depository Safe (Seite 3 von 9) (Englisch, Französisch, Spanisch)

651331

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Any Code + Any Code to unlock

1. Enter: # - Master Code - # - 1 - # - 1 - #

2. The lock will indicate a valid setting change

with a single signal.

Master or Manager Code + User Code to

unlock

1. Enter: # - Master Code - # - 2 - # - 2 - #

2. The lock will indicate a valid setting change

with a single signal.

Opening your safe in dual user mode

1. Enter: * - 1st Code - # - 2nd Code - #

2. The lock will indicate a valid code entry with

a single signal and the open light will stay

green for ﬁve (5) seconds.

3. Turn the handle clockwise before the green

light disappears

Returning to single user mode

(Single code to unlock)

1. Enter: # - Master Code - # - 0 - # - 0 - #

2. The lock will indicate a valid setting change

with a single signal.

Dual user mode

For additional security set your safe to dual user mode. This feature requires one user to enter their code and within sixty (60) seconds, a second user must

enter thier code to unlock the safe.

Always perform this operation with the door open.

Activate time delay

1. Enter: # - Master Code - # - (01-99) - # -

(01-99) - #

2. The lock will indicate a valid setting change

with a single signal.

Example: # - Master Code - # - 05 - # - 05 - #,

this will set a ﬁve (5) minute time delay.

3. Press * or # to initiate the Time Delay.

When time delay is set

(During the time delay period the keypad will

not respond to any entries)

The lock will ﬂash once every ﬁve (5) seconds

during time delay and will ﬂash once every

second during the last ten (10) seconds of the

time delay ending with a double signal.

The lock will ﬂash twice every ﬁve (5) seconds

during the open period. The open period length

is two (2) minutes.

During the open period you can unlock or

program your safe.

Deactivate time delay

1. Enter: # - Master Code - # - 00 - # - 00 - #

2. The lock will indicate a valid setting change

with a single signal.

Time delay mode

Always perform this operation with the door open.

This function will delay both the opening and programming of the lock.

This kit contains:

• Four (4) Masonry Anchors

Required tools:

• Safety Glasses

• Powered Drill

• Adjustable Wrench

• 1/2 in. (M12) Masonry Drill

Instructions:

1. Unlock safe and open door.

2. Remove safe ﬂoor carpet.

3. Look on the bottom of safe for four (4)

holes with cap plugs.

4. Remove the cap plugs.

5. Position the safe in the desired location.

6. From inside the safe mark the location of

the four (4) bolt down holes.

7. Move the safe aside to the clear marked

spots for drilling.

8. Using the ½ in. masonry drill, drill a 4 in.

deep hole in the marked locations.

9. Replace the safe in the desired location

with the holes in the safe aligned with the

drilled holes in the ﬂoor.

10. Pass each masonry anchor through the safe

ﬂoor into the drilled holes; making contact

with the safe ﬂoor.

11. Tighten each masonry anchor with the

adjustable wrench.

12. Replace safe ﬂoor carpet.

Floor Mount (optional)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sentry DH-134E - Depository Safe Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info