Seite 25
10.4 Setup Motor(DiSEqC)
NOTE: In order to make adjustments in the
SETUP MOTOR section of the menu the
DiSEqC setting in the ANTENNA SETTING
menu corresponding to the relevant Satellite
needs to be set to match the version of
DiSEqC that your system is using.
Using the CH+- buttons scroll down to the
SETUPMOTORmenuandpressOK.
• MotorDiSEqC:Set the DiSEqC setting to
match with that for the relevant Satellite in the
ANTENNA SETTING menu.
• Limit Set: Set the motor limit to EAST, WEST
or DISABLE.
• Move Steps: Adjust the incremental steps
between EAST and WEST using the VOL+-
buttons; select the step size between 3,
6,9,12 and 15 using the OK button. Move
the dish observing the signal strength bars to
determine best position.
• Continuously Move: Move the Motor
continuously EAST or WEST using the VOL+-
buttons.
• Store Position: Store a current location.
Press OK to store.
• (Reset) Calculate: Reset the motor position.
Press OK to execute.
• Goto Saved Position: Press OK to go to a
previously saved position (See Store Position
above).
• Goto XX: Moves the dish to the reference
position.
NOTE: Use the signal strength and quality
bars at the bottom of the screen to judge the
best position for the dish.
1.5 USALS (DiSEqC) Setup
This Menu is used to setup the USALS system
on your set top box to match with your motorised
dish system. If you have a USALS motorised
system, you must set your position (latitude
and longitude) in order to calculate all motor
positions for viewable satellites.You should refer
to the motorised dish manual to obtain more
information. Using the CH+- buttons scroll down
to the USALS SETUP menu and press OK..
• Latitude: Enter your Latitude using the
numerical keys
• North / South: Default is NORTH for UK.
• Longitude: Enter your Longitude using the
numerical keys.
• East / West: Select EAST / WEST depending
on the Satellite locations
• GotoXX: Moves the dish to the reference
position.
Enter the required information as above and
then press OK to SAVE and EXIT back to the
INSTALLATION MENU. Please refer to your
Motorised Dish Installation Manual for further
information.
