Bedienungsanleitung Severin AT 2287 (Seite 10 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

556681

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

too big, as they may become stuck in the

toaster. The thickness of the slices to be

toasted should not exceed 14 mm.

∙ In case of problems or malfunctions

during use, and before cleaning,

always remove the plug from the wall

socket.

∙ To remove a slice caught in the slot, use

a blunt wooden implement (e.g. a brush

handle). Never touch the metal heating

elements.

Before using for the ﬁ rst time

∙ Clean the toaster thoroughly (see

Cleaning and care).

∙ Switch on the toaster without any

bread inserted and go through at least

ﬁ ve toasting cycles at the maximum

temperature setting.

∙ Allow the toaster to cool down between

cycles.

∙ When switching on the appliance for the

ﬁ rst time, the toaster may emit a slight

smell and a little smoke, but this will

disappear after a short while. Ensure

sufﬁ cient ventilation.

Automatic switch-off

This appliance comes with an automatic

switch-off feature. If a bread slice should

become stuck and cannot be ejected after

the toasting cycle is complete, the toaster will

automatically switch off. Should this occur,

disconnect the appliance from the mains and

remove the bread slice as described in the

section General information.

Adjusting the degree of browning

The desired degree of browning can be

varied by turning the adjustable browning

control knob.

Light: turn the control knob anti-clockwise.

Dark: turn the control knob clockwise.

In the case of sliced bread speciﬁ cally

intended for toasting, we recommend setting

the browning control to position 4.

Operation

∙ Insert the plug into the wall socket.

∙ After adjusting the browning control, insert

the bread into the toast slot and press the

operating lever down.

∙ Once the desired degree of browning

is reached, the toaster switches off

automatically and the slices are ejected.

∙ To achieve regular browning when

toasting several slices in succession,

allow the toaster to cool down for 60 - 90

seconds after each cycle.

∙ Do not cover the toast slot during

operation.

Interrupting the toasting cycle

If you want to interrupt the toasting cycle,

press the eject button (

). The toaster will

switch off and the slices are ejected.

Warming up rolls, buns etc

∙ To warm up buns, rolls or other bakery

items, push the slide control operating

lever for the warming top all the way down

to raise the bread roll holder.

∙ Place the items to be warmed up on

the top, adjust the browning control to a

medium setting and then push down the

operating lever to switch on the toaster.

∙ Once the browning cycle is complete and

the appliance has automatically switched

off, turn the roll or bread over and repeat

the cycle.

∙ After use, return the bread roll holder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin AT 2287 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info