Bedienungsanleitung Severin BA-3254 (Seite 11 von 66) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712417

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

When ironing highly sensitive fabrics, or z

if you are not sure about the fabrics, you

can carefully test-iron at a non-visible

point, e.g. the inside of a seam. Start with

the lowest temperature.

If the laundry has been being dried in a z

dryer before ironing, the temperature

should be adjusted to ‘iron dry’. Very dry

fabrics are di cult to iron.

Start up

Clean the iron before using for the  rst

time, according to the instructions given in

the paragraph ‘General Care and Cleaning

- Self-cleaning system’.  is will result in

the removal of any dust particles from the

soleplate and subsequently lessen the smell

typically encountered when  rst switching

on.

Please ensure su cient ventilation.

Temperature settings

 e temperature can be set to 7 di erent

levels.  ese are indicated by a display bar on

the side of the LCD display.  e temperature

settings should be used as follows:

bar velvet

bar synthetic fabrics

bar silk

bar woll

bar cotton

bar denim

bar linen

Ironing

Always use the iron on a heat-resistant z

surface.

Steam ironing and the steam jet function z

require high temperatures.  e steam

symbol in the LCD display shows the

correct temperature range for steam

ironing.

A er  lling the reservoir with water, place –

the steam iron upright on its base stand

and insert the plug into the wall socket.

Use the temperature buttons ' – +' or '−' to

set the required temperature as indicated

by the ironing symbols.

While the iron is heating up, the –

temperature symbol in the LCD display

 ashes. Once the desired temperature has

been reached, an acoustic signal is heard

and the symbol shows steady.

Before ironing any fabric, the soleplate z

should be cleaned by passing it over an

old, clean cotton cloth while using the

steam jet function; this helps to  ush out

any dirt residues or lint particles trapped

inside the openings in the soleplate.

 e steam output can be adjusted with z

the steam control button, or switched o

completely for dry ironing.

For dry ironing, the water reservoir may z

be le empty. But if there is any water le

in the reservoir, the steam jet function

may also be used when dry-ironing at

higher temperature settings.

Place the steam iron upright on its base z

stand a er use and remove the plug from

the wall socket.

Automatic switch-o

If the appliance is switched on but has not

been used for a certain period of time, it

will automatically switch o .  is automatic

switch-o is indicated by a beep signal; in

addition, the Auto O symbol  ashes the

LCD display.  e automatic switch-o is

indicated by a beep signal; in addition, the

red indicator light  ashes. As soon as the iron

is moved, it will switch itself on again.

Horizontal position:

When resting on its sole plate, the iron

will switch o a er approx 30 seconds of

inactivity.

Vertical position:

When standing upright on its base, it will

switch o a er approx. 10 minutes.

Steam jet from underside and tip of

soleplate

When the steam jet button is depressed, an

additional hot steam jet is emitted from the

underside and the tip of the soleplate.  is

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin BA-3254 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info