12
- after use,
- in case of any malfunction,
- before cleaning the appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic or
similar applications, such as the
- staff kitchens in shops, offi ces and other
similar working environments,
- agricultural working environments,
- by customers in hotels, motels etc. and
similar accommodation,
- in bed-and breakfast type environments.
Filling with water
∙ Fill the water reservoir before using the
steam function or the spray nozzle.
∙ Remove the plug from the wall socket
before fi lling the reservoir.
∙ This steam iron is to a large extent
resistant to hard water (up to 15º dH).
Although normal tap water may be
used, it is advisable to use distilled,
demineralised or decalcifi ed water.
Should you be unsure about the hardness
of the water in your area, please enquire
of the relevant local authority department.
∙ Turn the steam control button to its ‘dry
ironing’ position.
∙ Open the cover of the water fi ll hole.
∙ Fill the empty water reservoir to
the indicated “Max” level, using the
measuring cup provided.
∙ Close the water fi ll hole.
Anti-drip function
If the temperature of the soleplate is not
suffi cient to produce steam, the water supply
is cut off automatically to prevent dripping.
General information about ironing
Always check fi rst whether a label with
ironing instructions is attached to the article
to be ironed.
∙ The meaning of the ironing symbols is as
follows:
• synthetics
(low temperature)
•• silk and wool
(medium temperature)
••• cotton and linen
(high temperature)
∙ These markings can also be found on the
temperature control knob of the steam
iron in form of dot symbols.
∙ Laundry to be ironed should be
sorted according to the fabric ironing
temperature. Follow the ironing symbols
and start with the lowest temperature.
∙ When ironing highly sensitive fabrics, or
if you are not sure about the fabrics, you
may carefully test-iron at a non-visible
point, e.g. inside of seam. Start with the
lowest temperature.
∙ If the laundry is being dried in a dryer
before ironing, the temperature should be
adjusted to “iron dry”. Very dry fabrics are
diffi
cult to iron.
Start up
Clean the steam iron before using for the
fi rst time, according to the instructions
given in the paragraph ‘Cleaning and care -
Self-cleaning system’. This will result in the
removal of possible dust particles from the
soleplate and subsequently lessen the smell
