Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Important safety instructions
● Before the appliance is used, the main
body as well as any attachment fitted
should be checked thoroughly for any
defects. Should the appliance, for
instance, have been dropped onto a hard
surface, it must not be used any longer:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
● The accessible housing surfaces may
become very hot during operation.
● This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
● Children should be supervised to ensure
that they do not play with the appliance.
● Do not leave the appliance unattended
while in use.
● Caution:
When overheated, food may tend to
ignite. However, the likelihood of this
occurring is increased where food with a
high fat or oil content is concerned.
● Do not position or operate the appliance
close to or underneath any wall-
cupboards or hanging objects such as
curtains or any other inflammable
materials.
● During operation, the appliance must be
placed on a heat-resistant surface,
impervious to splashes, stains or hot
steam. The feet should always be fully
extended to allow for the maximum
distance between the appliance and the
work surface.
● Always switch off and remove the plug
from the wall socket after use, as well as
- in cases of any malfunction and,
- during cleaning.
● When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
● Do not let the power cord hang free.
● Keep its power cord, or that of any other
appliances well away from any hot parts
of the plate at all times.
● The appliance is not intended to be
operated by means of an exter-nal timer
or separate remote-control system.
● No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
● This appliance is intended for domestic
use only and not for commercial
applications.
● In order to comply with safety
regulations and to avoid hazards, re-pairs
of electrical appliances must be carried
out by qualified per-sonnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
Start up
Before using the appliance for the first time,
let it heat up for approximately 3 minutes at
maximum power, while ensuring sufficient
ventilation. This will help to ‘burn in’ the
protective coating which safeguards the hot-
plate against corrosion. During this process,
a slight smell and a little smoke may be
Electric table-top hot-
plates
╞
6
