appliance to one of our customer service
departments. The addresses can be found
in the appendix to this manual.
General information
A foot massage helps to reduce tension in
muscle and tissue areas, enhancing the blood
circulation and simultaneously stimulating
the metabolic process, thus cleansing the
body tissue of waste residues.
-
The massage elements for the foot-reflex
zones are fitted to the mounting between
the foot pads and can be removed for
cleaning.
Roller massage:
By moving the foot backwards and
forwards over the roller massage
element, you will enjoy a soothing
massage of the sole.
Massage element with nodes:
This massage element gives a selective
deeply penetrating massage for tired feet.
Acupressure element:
The acupressure element has a strongly
stimulating effect on the sole of the foot.
To achieve the optimum massaging
effect, the pressure on the foot can be
varied as desired.
-
In order to enhance the massage effect, a
foot massage should be applied using
warm water. A non-foaming bath gel
may be added.
-
The integral heating element located
underneath the studded foot pads
prevents the warm water from cooling
down too fast, although it is not designed
to heat up the water.
● The user is recommended to refrain from
massage treatment when suffering from
phlebitis in the legs, varicose veins (if
they tend to bleed easily), swollen feet or
any pain of unknown origin. If in doubt,
consult your doctor before using the
appliance.
Control settings
0 Unit is switched off
1 Massage
2 Heating + bubble function
3 Heating + bubble function +
massage
Operation
-
Place the foot massager on the floor in
front of a chair.
-
If required, fit a massage element into its
mounting.
-
Fill with warm water until the indicated
water level is reached.
-
Insert the plug into the wall socket. Make
sure that the control switch is in the “0”
position.
-
Seat yourself comfortably on the chair
and position your feet on the foot pads.
Do not stand on the unit.
-
Select the desired function with the
control switch. The recommended
application time is 10 to 20 minutes.
-
After use, set the control switch to “0”
again before removing the plug from the
wall socket.
-
Empty out the water afterwards.
Cleaning and care
● Before cleaning the appliance, ensure it is
disconnected from the power supply.
● To avoid the risk of electric shock, do not
clean the housing of the foot-massager
with water and do not immerse it in
water.
● Do not use abrasives or harsh cleaning
solutions.
-
The inside and outside of the foot-
massager may be cleaned with a slightly
damp lint-free cloth. Use household
tissue paper to wipe dry afterwards.
Special, commercially available cleaning
agents for synthetic materials may also be
9
